psu's in belgium - Page 3

RichBa5tard · 22nd April 2004, 16:51

Quote:

Originally posted by Tum0r
Qtec is awfull!

I havnt heard one good thing about it.
If u value my advise a little bit cancel your order and order a decent psu.

Or u could try...

QTec 400W is awful, i agree. But the 550W model is good. Decent voltage rails, very high quality dual fans. I've been running on a 550W qtec for 18 months now, excellent bang for the buck psu in my humble opinion.

22nd April 2004, 17:02

yup, same here. I don't have mine as long as Richbastard but there's a lot of hardware hooked up atm and it keeps it's rails very well.
The 12 and 3.3 V rails never drop below spec and the 5V rail only once dropped below 4.9 and usually ranges arround 4.95V

22nd April 2004, 18:35

I hope u guys are right

Does the 550W have sensewires and does it run hot?

RichBa5tard · 22nd April 2004, 18:54

22nd April 2004, 21:55

my q-tec 550 sucked, and apparently there are two versions, q-tec550 and 550 PFC, mine did not say pfc and it sucked, pfc version should be more stable and costs the same, I also found it to be a very noisy psu :grum:

RichBa5tard · 22nd April 2004, 22:37

Aah yes, it's indeed noisy, BUT they're nevertheless equipped with highquality fqns. Mine have been working at 5V for 18months, and they're absolutely noiseless (only fans in via epia system) and don't suffer from the too low operating voltage. In contrary to expensive Papst fans they don't start to 'purr' after a few months running below minimal recommended operating voltage (7V).

jmke · 22nd April 2004, 22:38

I had that happen to a coolink fan when running @ low voltage

22nd April 2004, 23:19

550W for a epia?
just how many hdd do u have?

RichBa5tard · 22nd April 2004, 23:41

The Qtec 550W was the only regular PSU i had at the time i bought the epia system... and it was the most silent one too (with fans running at 5V), so it seemed like a logical choice. : )

Actually, the 550W qtec had no problems powering the epia system (~75W) fanless.

187(V)URD@ · 6th May 2004, 17:24

calantak how is that levicom psu ?

22nd April 2004, 18:54	#24
RichBa5tard [M] Reviewer/HWBot ***** Join Date: May 2002 Posts: 3,344	2no __________________ HTPC (mac osx): Mac Mini \| Core Duo 1.6Ghz \| 2GB DDR2 \| 26\" TFT Development (mac osx): Macbook \| Core 2 2.0Ghz \| 4GB DDR2 \| 250GB HD Games (win xp)*: E2160 @ 2.4Ghz \| HD3850 OC \| Asrock 4coredual-vsta \| 2GB DDR2

22nd April 2004, 22:37	#26
RichBa5tard [M] Reviewer/HWBot ***** Join Date: May 2002 Posts: 3,344	Aah yes, it's indeed noisy, BUT they're nevertheless equipped with highquality fqns. Mine have been working at 5V for 18months, and they're absolutely noiseless (only fans in via epia system) and don't suffer from the too low operating voltage. In contrary to expensive Papst fans they don't start to 'purr' after a few months running below minimal recommended operating voltage (7V). __________________ HTPC (mac osx): Mac Mini \| Core Duo 1.6Ghz \| 2GB DDR2 \| 26\" TFT Development (mac osx): Macbook \| Core 2 2.0Ghz \| 4GB DDR2 \| 250GB HD Games (win xp): E2160 @ 2.4Ghz \| HD3850 OC \| Asrock 4coredual-vsta \| 2GB DDR2

22nd April 2004, 22:38	#27
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	I had that happen to a coolink fan when running @ low voltage __________________

22nd April 2004, 23:41	#29
RichBa5tard [M] Reviewer/HWBot ***** Join Date: May 2002 Posts: 3,344	The Qtec 550W was the only regular PSU i had at the time i bought the epia system... and it was the most silent one too (with fans running at 5V), so it seemed like a logical choice. : ) Actually, the 550W qtec had no problems powering the epia system (~75W) fanless. __________________ HTPC (mac osx): Mac Mini \| Core Duo 1.6Ghz \| 2GB DDR2 \| 26\" TFT Development (mac osx): Macbook \| Core 2 2.0Ghz \| 4GB DDR2 \| 250GB HD Games (win xp): E2160 @ 2.4Ghz \| HD3850 OC \| Asrock 4coredual-vsta \| 2GB DDR2

6th May 2004, 17:24	#30
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	calantak how is that levicom psu ? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

22nd April 2004, 17:02	#22
kristos Posts: n/a	yup, same here. I don't have mine as long as Richbastard but there's a lot of hardware hooked up atm and it keeps it's rails very well. The 12 and 3.3 V rails never drop below spec and the 5V rail only once dropped below 4.9 and usually ranges arround 4.95V

22nd April 2004, 18:35	#23
Tum0r Posts: n/a	I hope u guys are right Does the 550W have sensewires and does it run hot?

22nd April 2004, 21:55	#25
Tarantula Posts: n/a	my q-tec 550 sucked, and apparently there are two versions, q-tec550 and 550 PFC, mine did not say pfc and it sucked, pfc version should be more stable and costs the same, I also found it to be a very noisy psu :grum:

22nd April 2004, 23:19	#28
Tum0r Posts: n/a	550W for a epia? just how many hdd do u have?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LC Power, Silverstone & Cooler Master PSUs: Clash of the Titans	jmke	WebNews	0	21st June 2010 17:58
Corsair Launches 1200W, 850W and 750W Professional Series Gold PSUs	jmke	WebNews	0	1st June 2010 09:03
Cooler Master rolls out three high-efficiency PSUs	jmke	WebNews	0	3rd February 2010 12:44
Kingston Technology SSDNow V ³Value² Series now available in Belgium	jmke	WebNews	0	31st August 2009 10:50
Apple iPhone 3G to cost €525 in Belgium	jmke	WebNews	17	22nd July 2008 16:29
X-Spice intros compact 430/530/630W PSUs	jmke	WebNews	0	30th June 2008 09:57
Corsair Eco-Friendly PSUs Deliver Performance and Efficiency	jmke	WebNews	0	11th April 2008 10:33
Antec TruePower Quattro 850W & 1000W PSUs	jmke	WebNews	0	25th August 2007 15:41
700W GameXStream & 620W Enermax Liberty PSUs	jmke	WebNews	0	22nd August 2006 20:20
where can in find ocz in belgium?	calimero	Mad Bargains	18	30th April 2005 19:05