windwithme's hw pics & benches - Page 6

jmke · 2nd January 2005, 17:55

11.66v?
ouch

jmke · 2nd January 2005, 17:56

Quote:

Originally posted by jmke

how does it react when more voltage is pushed through the core?

windwithme · 4th January 2005, 04:56

The package is very nice.

Show the picture of EPOX 9NPA+.

In the right side,It has the port-80 and Pown-on key and reset key

In the left side,

Input/Ouput

Near by CPU picture

This is BIOS optiion
CPU can reach 400MHZ

PCI-E Option

RAM option

CPU Ratio option

CPU Voltage. It is very great. And Its highest voltage is 0.35V.

RAM Voltage. It can reach 3.1V.

RAM: Dram-timing Option

BIOS Voltage and Temp

Very good Booting LOGO

Testing Environment
K8 939 3000+ (0.09) 0048SPAW
G-Skill TCCD LA 256MBX2
EPOX 9NPA+
Leadtek GeForce 6200
TEAC 512EB
Seasonic 430W

Show the picture.
It has three blue light. It can show the situation of CPU,CHIP,DIMM.
We can check that POWER-ON or POWER-OFF.

It is original FAN environment. It can 2.7G without additional Voltage.

DDR700 Ducal Channel Mode 1T pass

Benefit
1. CPU and RAM has more additional voltage.
2. It is more helpful to the overclocker-user.
3. It is very nice package in the market and beautiful Booting LOGO.
4. Good overclock ability in this Motherboard.

This may make progress in this situation. :
1.BIOS may support more CPU-RATIO option .in the down option.
2.The dram-parameter should powerful.
Ex:MSI_NF4 can boot in the ¡V3-3-x option above 300MHZ (1T) environment.

This is the MSI_NF4 feature in my hand.
1.The voltage option is more powerful than EPOX.
2.I am collecting the 5 BRAND-MF4 Motherboard.(EPOX ,MSI,DF-.GAGABYTE,ASUS)
3.Only DFI motherboard is more difficult.

About the ASUS?
I have do it.
But it can not 300MHZ ¡¥1T¡¨.I still wait the newest edition BIOS.
NEO4 and 9NPA+ can reach 350MHZ or above....easily
But asus still be unstable or it can not boot into LOGO in the 300MHZ environment.

Sidney · 4th January 2005, 07:08

May be you should consider writing reviews for [M].

4th January 2005, 08:33

it seems like they have learned from their mistakes, 3.1 vdimm

, a hell of al lot better than 2.8 on their 9nda3+!

4th January 2005, 10:53

mmmmmmm K8 939 3000+ (0.09) 0048SPAW

mmmmmmm G-Skill TCCD LA 256MBX2

mmmmmmm EPOX 9NPA+

Quote:

Originally posted by lazyman
May be you should consider writing reviews for [M].

I wanna see an overclocking comparison review of these

:

Quote:

Originally posted by windwithme
I am collecting the 5 BRAND-MF4 Motherboard.(EPOX ,MSI,DF-.GAGABYTE,ASUS)

Quote:

Originally posted by windwithme
Only DFI motherboard is more difficult.

So we can expect pictures very soon?

Quote:

Originally posted by windwithme
DDR700 Ducal Channel Mode 1T pass

Did you have problems running 1T in bank 1&2?

Did you have any problems at all?

187(V)URD@ · 4th January 2005, 13:11

vote windwithme for [M] reviewer

The Senile Doctor · 7th January 2005, 12:35

I cannot set my cas at 2 at these high memspeeds with 2*512 on this neo2

but that doesn't make much difference, does it?
I cool the winchester 3000+ with an xp90 with lowrpm 92mmfan (very silent is the main point for this setup), and I can easily do 9*300 1:1 but the memory isn't completely stable.
Now at 9*292 it is completely stable with 2*512 mb adata ddr600
timings cas 3 3-3-10 (I always use 10), but sadly 2t command, 1t command reboots at this speed

how much is the 1t command different in speed?
if I could 5:4 the memory (+-250 memoryspeed) and go at cas 2.5 3-3-10 and 1t, would that be better?

jmke · 7th January 2005, 12:36

1T is a lot of difference; 270 1T > 292 2T

The Senile Doctor · 7th January 2005, 12:42

in total system speed?
even when you gain 300 mhz?
then it would mean that it's more interesting to go for 5:4 and highest possible htt for your cpu?

2nd January 2005, 17:55	#51
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	11.66v? ouch __________________

4th January 2005, 04:56	#53
windwithme Eastern OC Expert Join Date: Dec 2004 Posts: 1,096	EPOX 9NPA+(nForce 4 Ultra) Testing Report The package is very nice. Show the picture of EPOX 9NPA+. In the right side,It has the port-80 and Pown-on key and reset key In the left side, Input/Ouput Near by CPU picture This is BIOS optiion CPU can reach 400MHZ PCI-E Option RAM option CPU Ratio option CPU Voltage. It is very great. And Its highest voltage is 0.35V. RAM Voltage. It can reach 3.1V. RAM: Dram-timing Option BIOS Voltage and Temp Very good Booting LOGO Testing Environment K8 939 3000+ (0.09) 0048SPAW G-Skill TCCD LA 256MBX2 EPOX 9NPA+ Leadtek GeForce 6200 TEAC 512EB Seasonic 430W Show the picture. It has three blue light. It can show the situation of CPU,CHIP,DIMM. We can check that POWER-ON or POWER-OFF. It is original FAN environment. It can 2.7G without additional Voltage. DDR700 Ducal Channel Mode 1T pass Benefit 1. CPU and RAM has more additional voltage. 2. It is more helpful to the overclocker-user. 3. It is very nice package in the market and beautiful Booting LOGO. 4. Good overclock ability in this Motherboard. This may make progress in this situation. : 1.BIOS may support more CPU-RATIO option .in the down option. 2.The dram-parameter should powerful. Ex:MSI_NF4 can boot in the ¡V3-3-x option above 300MHZ (1T) environment. This is the MSI_NF4 feature in my hand. 1.The voltage option is more powerful than EPOX. 2.I am collecting the 5 BRAND-MF4 Motherboard.(EPOX ,MSI,DF-.GAGABYTE,ASUS) 3.Only DFI motherboard is more difficult. About the ASUS? I have do it. But it can not 300MHZ ¡¥1T¡¨.I still wait the newest edition BIOS. NEO4 and 9NPA+ can reach 350MHZ or above....easily But asus still be unstable or it can not boot into LOGO in the 300MHZ environment.

4th January 2005, 07:08	#54
Sidney Member Join Date: Mar 2004 Posts: 15,738	May be you should consider writing reviews for [M]. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

4th January 2005, 13:11	#57
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	vote windwithme for [M] reviewer __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

7th January 2005, 12:35	#58
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	I cannot set my cas at 2 at these high memspeeds with 2512 on this neo2 but that doesn't make much difference, does it? I cool the winchester 3000+ with an xp90 with lowrpm 92mmfan (very silent is the main point for this setup), and I can easily do 9300 1:1 but the memory isn't completely stable. Now at 9292 it is completely stable with 2512 mb adata ddr600 timings cas 3 3-3-10 (I always use 10), but sadly 2t command, 1t command reboots at this speed how much is the 1t command different in speed? if I could 5:4 the memory (+-250 memoryspeed) and go at cas 2.5 3-3-10 and 1t, would that be better? __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

4th January 2005, 08:33	#55
Da_BoKa Posts: n/a	it seems like they have learned from their mistakes, 3.1 vdimm , a hell of al lot better than 2.8 on their 9nda3+!

7th January 2005, 12:36	#59
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	1T is a lot of difference; 270 1T > 292 2T __________________

7th January 2005, 12:42	#60
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	in total system speed? even when you gain 300 mhz? then it would mean that it's more interesting to go for 5:4 and highest possible htt for your cpu? __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Everest can't run benches	supershanks	Hardware/Software Problems, Bugs	8	18th June 2009 11:29
MSI's X58 Nehalem Motherboard Is Called "Eclipse" Pics Inside!	jmke	WebNews	0	21st August 2008 12:49
First AMD 4x4 numbers trickle out - Good numbers, odd benches	jmke	WebNews	0	17th July 2006 17:48
Bios is different, help with "Dynamic Overclocking" PICS!!	Old Atari Nut	Hardware Overclocking and Case Modding	1	18th January 2005 01:26
Epox 9NPA+ nForce4 motherboard Pics	jmke	WebNews	5	13th December 2004 15:55
Check out my updated pics!!!!!	JoniNItro	Hardware Overclocking and Case Modding	9	11th June 2004 17:20
Da IceCase (800k pics)	FreeStyler	Hardware Overclocking and Case Modding	12	20th October 2003 15:57
high quality pics of opteron's	TeuS	General Madness - System Building Advice	5	27th April 2003 03:55
klein casemodje. (big pics)	FreeStyler	Hardware Overclocking and Case Modding	3	2nd January 2003 18:00
HOW-TO: polish guide (quickie with pics :)	RichBa5tard	FAQ / INFO / HOW-TO	2	17th June 2002 18:10