| Thread Tools |
1st September 2012, 21:18 | #261 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| Back from holidays. Nice to see we finished 5th and won one of the stages. Merci voor de PCMark uploads
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
3rd September 2012, 10:39 | #262 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| Did a load test yesterday of the 'Jort Cascade 1' system with my 3770K. Main purpose of the test was to check capability to hold load. Unloaded temp was -100°C. Temps under load (Wprime1024M 5,5GHz and 1,5V) ran from -93°C to -70°C and back (interworkings between stage 1 and 2 to keep up with load). We only did a limited testing but initial results look ok: With Cascade 3770K max is 5,7 SuperPi1M stable. Wprime1024M is ok at 5,5 but with some tweaking (both cascade and setup) 5,6 will probably be ok as well - which was the aim. Compared to: With Single stage 3770K max was 5,3 SuperPi1M stable With LN2 3770K (-160°C) max is 6GHz Electrics still need to be done as well as onboard temp sensors, but cooling circuits are ok.
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
4th September 2012, 00:04 | #263 |
[M] Reviewer Join Date: Dec 2008
Posts: 3,209
| Either that CPU is the suck Pascal or the cascade does not perform as it should. FYI Roger can do 6ghz 4cores 3D on cascade... I can do that too at +/-100 with LN2...
__________________ |
4th September 2012, 07:49 | #264 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| I accidentally saw his scores when surfing on HWI site. Nice runs btw! Difference with his setup is that he's pushing 1.81V through his CPU. I only went up to 1.575V For my 6.3GHz run on LN2 SuperPi1M I used 1.872V As I said it was just a first test and we didn't have much time (as Jort's load tester was broken). The aim of the cascade is to have a stable setup for GPU benching. For that it needed to beat my 2600K on single stage which ran 5.6. So anything above 5.6 is a bonus. The unit looks nice as well (could do with some black matt paint and shrimp logo but that's for later). I'll also be able to use it as coffee table shoud you guys drop buy (as it's huge) On another topic: won a prize with the ECS nonstop competition on Hwbot (lucky draw as I only posted one score ).
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
1st October 2012, 10:29 | #265 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| It has finally arrived!!! Did some first tests with my 3770K this weekend. With Single Stage I got up to 5,3GHz With Cascade I can get up to 5,6GHz @ 1.65V Wprime32M stable. (increasing Vcpu doesn't help) With Cascade SuperPi 1M can be run at 5,8GHz. With LN2 (-160) I managed 6GHz Wprime32M stable. With LN2 I managed 6.3GHz SuperPi1M stable. Under load (Wprime1024M) at 5.5GHz temps drop from -85 to -78. Power consumption: Stage 1 only: 400W Stage 1+2: 850-900W Conlcusion: I need a better CPU
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
3rd October 2012, 20:24 | #266 |
Member Join Date: Jun 2004 Location: mechelen(belgium)
Posts: 2,037
| I am glad it works
__________________ watercooling, chilled water,direct phase change, cascade, custom modding |
3rd October 2012, 20:25 | #267 |
[M] Reviewer Join Date: Dec 2008
Posts: 3,209
| I think Jort's comment means the warranty is over Pascal
__________________ |
7th October 2012, 22:13 | #268 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| Finally some benchtime again Some tests on HD3870X2 and dual HD3870X2. As usual nice AM3, 3DMark05 and 06 runs, crappy 03 run. Had some DX issue with 3DMark01SE which meant it wouldn't run. Need to have a look as there's likely some nice points to be had there as well. Resulting points: UHP: +54.1 points UGP: + 13.5 points HTPP: +3.3 points
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
16th October 2012, 22:36 | #269 |
Member Join Date: May 2007 Location: Duffel
Posts: 542
| Benching ongoing with 3870X2 and HD2600XT. Some small points with HD2600XT before it died (failed pencil mod) Really amazing/strange dual HD3870X2 3DM01SE score: http://www.hwbot.org/submission/2321303_ Dual gold. Jumped to 3rd place in Belgium OC league
__________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB *Quantum Fireball KA 18GB ATA-66 * 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 |
16th October 2012, 22:41 | #270 |
[M] Reviewer Join Date: Dec 2008
Posts: 3,209
| Nice one Pascal, you made my day !!!
__________________ Last edited by leeghoofd : 16th October 2012 at 22:45. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gamer's Bench log. | Gamer | Hardware Overclocking and Case Modding | 82 | 21st October 2011 09:23 |
Lian Li PC-T60 Test Bench | jmke | WebNews | 0 | 21st December 2010 10:42 |
Lian Li PC-T7B Mini-ITX Test Bench | jmke | WebNews | 0 | 21st September 2010 08:59 |
Dimastech Easy Test Bench v2.5 Tested | jmke | WebNews | 0 | 30th May 2010 17:32 |
Lian-Li Goes Test Bench Crazy With PC-T60 & PCT7 | jmke | WebNews | 0 | 29th April 2010 08:32 |
Lian Li Launches PITSTOP PC-T1 Mini-ITX Spider Test Bench | jmke | WebNews | 0 | 17th April 2010 12:39 |
DimasTech Bench Table Easy V2 | jmke | WebNews | 0 | 20th April 2009 16:15 |
HSPC Tech Station PC Test Bench | jmke | WebNews | 0 | 18th February 2006 00:06 |
Thread Tools | |
| |