Teemto's bench log - Page 21

leeghoofd · 23rd March 2012, 20:06

in depth look at pcmark05 , got 2 SSDs from Tones, will see how it goes... only way to boost points big time...

Gamer · 27th March 2012, 22:43

Aan het bieden op een 9800GX2 ?

Teemto · 27th March 2012, 23:32

Nope, dus go ahead zou ik zeggen

Teemto · 8th May 2012, 13:04

Project Teemto's Garage is starting to take shape

- Some painting done during the weekend.
- Installed a couple of shelfs yesterday (after picking up some LN2 leftovers at Tones).
- Tore down an overhead shelf

Now comes the move of all the equipment.
Coming weekend will see some trips to the container park to dump all the garbage that's been accumulating in my garage

Before and after pictures will be for in a couple of days.

Teemto · 14th May 2012, 08:58

First benching done in new location:

http://www.facebook.com/media/set/?s...type=3&theater

* HD6570: 8 points + 21.8 team points (Cups: 2G/1S/1B/6M)
Card basically sucks: max MHz core 800/mem 950
Didn't find a voltmod to improve.

Flashed my Gene-Z to the latest Bios so all is ready for Ivy Bridge.

Teemto · 16th May 2012, 20:53

Did a quick test of the 3770K on my Maximus IV Gene under phase:
5.4GHz requires 1.56V

Tried it on my new Maximus V Gene

.
Same result as on the Gene IV.
Under phase 5.6GHz at 1.62V boots but no go in Windows.
Does Ivy require that much more volts even under phase or do I just have a bad CPU?

Did some checks on HWbot and found the following entries in different benches (all under phase):
5.4GHz @ 1.66V
5.6GHz @ 1.67V also on Max V Gene.
5.7GHz @ 1.768V also on Max V Gene.

5.6-5.8 is max on phase.

Some maybe mines a very good one?? Will try to increase the voltage a bit...

Teemto · 16th May 2012, 22:55

Updated Bios to 0813. Initial one was 0402 which isn't even listed on the ASUS website anymore!
Tried 55x100 @ 1.7V boots into win7 but Wprime32M locks up.
So it seems like a dud

Did manage to get a max Bclk of 111MHz

47x111 @ 1.56V

leeghoofd · 17th May 2012, 14:16

Pascal you need to go far more cold to get 6ghz... if this CPu does that under phase, some can't even do 5.8 under cascade...

Ivy is LN2 only, stop using the phase on these CPUs...

Teemto · 17th May 2012, 14:26

I was afraid of that. I was hoping for 5.6-5.8 on SS. SS is cheaper for benching GPU's than LN2 (as long as I don't look at my electricity bill that is

).

I'll give it a try with LN2 in the next days. First I'm going to make a new dualboot XP-Win7 SSD. This time with AHCI in WinXp.
Got a USB floppy drive to install the AHCI drivers during XP installation. Should work.

Before LN2 I'll try to find some nice RAM timings so that I'm all set to go.

Gamer · 17th May 2012, 23:15

Good luck!

23rd March 2012, 20:06	#201
leeghoofd [M] Reviewer Join Date: Dec 2008 Posts: 3,209	in depth look at pcmark05 , got 2 SSDs from Tones, will see how it goes... only way to boost points big time... __________________

27th March 2012, 22:43	#202
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,587	Aan het bieden op een 9800GX2 ? __________________

27th March 2012, 23:32	#203
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Nope, dus go ahead zou ik zeggen __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

8th May 2012, 13:04	#204
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Project Teemto's Garage is starting to take shape - Some painting done during the weekend. - Installed a couple of shelfs yesterday (after picking up some LN2 leftovers at Tones). - Tore down an overhead shelf Now comes the move of all the equipment. Coming weekend will see some trips to the container park to dump all the garbage that's been accumulating in my garage Before and after pictures will be for in a couple of days. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

14th May 2012, 08:58	#205
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	First benching done in new location: http://www.facebook.com/media/set/?s...type=3&theater * HD6570: 8 points + 21.8 team points (Cups: 2G/1S/1B/6M) Card basically sucks: max MHz core 800/mem 950 Didn't find a voltmod to improve. Flashed my Gene-Z to the latest Bios so all is ready for Ivy Bridge. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 Last edited by Teemto : 14th May 2012 at 11:16.

16th May 2012, 20:53	#206
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Did a quick test of the 3770K on my Maximus IV Gene under phase: 5.4GHz requires 1.56V Tried it on my new Maximus V Gene . Same result as on the Gene IV. Under phase 5.6GHz at 1.62V boots but no go in Windows. Does Ivy require that much more volts even under phase or do I just have a bad CPU? Did some checks on HWbot and found the following entries in different benches (all under phase): 5.4GHz @ 1.66V 5.6GHz @ 1.67V also on Max V Gene. 5.7GHz @ 1.768V also on Max V Gene. 5.6-5.8 is max on phase. Some maybe mines a very good one?? Will try to increase the voltage a bit... __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

16th May 2012, 22:55	#207
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Updated Bios to 0813. Initial one was 0402 which isn't even listed on the ASUS website anymore! Tried 55x100 @ 1.7V boots into win7 but Wprime32M locks up. So it seems like a dud Did manage to get a max Bclk of 111MHz 47x111 @ 1.56V __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

17th May 2012, 14:16	#208
leeghoofd [M] Reviewer Join Date: Dec 2008 Posts: 3,209	Pascal you need to go far more cold to get 6ghz... if this CPu does that under phase, some can't even do 5.8 under cascade... Ivy is LN2 only, stop using the phase on these CPUs... __________________

17th May 2012, 14:26	#209
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	I was afraid of that. I was hoping for 5.6-5.8 on SS. SS is cheaper for benching GPU's than LN2 (as long as I don't look at my electricity bill that is ). I'll give it a try with LN2 in the next days. First I'm going to make a new dualboot XP-Win7 SSD. This time with AHCI in WinXp. Got a USB floppy drive to install the AHCI drivers during XP installation. Should work. Before LN2 I'll try to find some nice RAM timings so that I'm all set to go. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

17th May 2012, 23:15	#210
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,587	Good luck! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gamer's Bench log.	Gamer	Hardware Overclocking and Case Modding	82	21st October 2011 09:23
Lian Li PC-T60 Test Bench	jmke	WebNews	0	21st December 2010 10:42
Lian Li PC-T7B Mini-ITX Test Bench	jmke	WebNews	0	21st September 2010 08:59
Dimastech Easy Test Bench v2.5 Tested	jmke	WebNews	0	30th May 2010 17:32
Lian-Li Goes Test Bench Crazy With PC-T60 & PCT7	jmke	WebNews	0	29th April 2010 08:32
Lian Li Launches PITSTOP PC-T1 Mini-ITX Spider Test Bench	jmke	WebNews	0	17th April 2010 12:39
DimasTech Bench Table Easy V2	jmke	WebNews	0	20th April 2009 16:15
HSPC Tech Station PC Test Bench	jmke	WebNews	0	18th February 2006 00:06