Stuck - Page 3

jmke · 11th January 2004, 21:55

overclocking is. finding the exact limit of a system isn't

187(V)URD@ · 11th January 2004, 23:05

Quote:

Originally posted by FreeStyler
You should first run memtest, prime stresses both the CPU and memory (and off course the CPU mem bridge of th chipset)
First test full on low speed CPU and high speed FSB's.
Memtest prime and 3Dmark.
Then as you found the max FSB, up the multi to find max CPU.
Testing again memtest prime and 3dmark.

No-one said good overclocking was a quick fix.

Thx freestyler gonna do what you just said after my exams

.

I get back soon when my overclock is finished.
:grin:

187(V)URD@ · 12th January 2004, 20:13

got a problem, i tryed 13.5 * 166fsb = 2200mhz but my pc said xp1800+

, my pc doesn't accept the "high" mp ??.

I am now on 10*200fsb = 2ghz.

12th January 2004, 21:04

you're limited to a multi of max 13 or 12.5 (help me out here guys, I foggot)

jmke · 12th January 2004, 21:36

12.5 is the max without doing extra manipulations to the cpu

187(V)URD@ · 12th January 2004, 22:09

And that are wiretricks ? explain plz :-)

jmke · 12th January 2004, 22:19

Quote:

Cut the 3rd and 5th bridge of L3 to unlock all the multys.

If i'm not mistaken you can cut them while *shortcircuiting* them. 5V + needles will do the trick. But i would ask a second opinion about this.

EDIT:
JCViggen: I would recommend using the 5V line from a PSU to cut the bridges. works perfectly and leaves no marks. takes 15 seconds

more info:http://www.beachlink.com/candjac/Workarounds.htm

187(V)URD@ · 13th February 2004, 00:17

Wanted to know my CPU limit and it ran into 2300MHZ @ 1.75Vcore.
18*133 he wouldn't start up also increased VCORE to 1.8V still nothing.
Then I wanted to know my max FSB , was around 205-210 but i choose 200.

Didn't had luch time for my memory tbh but it is on 6-3-2-2 @ 200MHZ.

then i wanted to add the stuff togheter but it failed , wouldn't go to windows.

Now i am stuck on 2200MHZ @200FSB with 1.75Vcore and 6-3-2-2 @ 200MHZ.

Roomtemp. 20-23°C
Idle 37°C ---- Load 39-42°C
Cooler slk7

Nog iets dat ik niet begrijp is dat men Vcore in bios 1.75 is ,
in CPUZ = 1.6V
MBM = Core1 : 1.6V --- Core2 : 1.8V

Screen 1
screen 2

This is not so

13th February 2004, 00:35

mod your psu rails

upping the 3.3 to a nice 3.5 will help u get a better fsb...
upping the 5V helps when u oc a radeon
upping the 12v looks good

all and all it a very easy mod @ xtreme

13th February 2004, 10:52

And you could throw your PC into a nuclear reactor. The extra energy might squeeze out a couple of extra MHz.

But it will most likely hurt the PC in the end.

11th January 2004, 21:55	#21
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	overclocking is. finding the exact limit of a system isn't __________________

12th January 2004, 21:36	#25
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	12.5 is the max without doing extra manipulations to the cpu __________________

12th January 2004, 22:09	#26
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	And that are wiretricks ? explain plz :-) __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fix for When Pinned Jump List Items Get Stuck in Windows 7	jmke	WebNews	0	23rd October 2009 13:16
Intel Gulftown 6 cores 32nm stuck to DDR3 1066	jmke	WebNews	0	25th May 2009 11:40
system is getting stuck frequently	Bolded	Hardware/Software Problems, Bugs	2	30th March 2009 10:16
Stuck at 4GHz with the Phenom II X4 940...	jmke	WebNews	3	1st February 2009 03:33
Stuck at POST screen	agent #2	Hardware/Software Problems, Bugs	5	27th August 2006 12:16
WU's stuck ?	Belgatom	Site & Forum Feedback - Folding@Home	4	17th January 2003 00:47

12th January 2004, 20:13	#23
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	got a problem, i tryed 13.5 * 166fsb = 2200mhz but my pc said xp1800+ , my pc doesn't accept the "high" mp ??. I am now on 10*200fsb = 2ghz.

12th January 2004, 21:04	#24
FreeStyler Posts: n/a	you're limited to a multi of max 13 or 12.5 (help me out here guys, I foggot)

13th February 2004, 00:17	#28
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Wanted to know my CPU limit and it ran into 2300MHZ @ 1.75Vcore. 18*133 he wouldn't start up also increased VCORE to 1.8V still nothing. Then I wanted to know my max FSB , was around 205-210 but i choose 200. Didn't had luch time for my memory tbh but it is on 6-3-2-2 @ 200MHZ. then i wanted to add the stuff togheter but it failed , wouldn't go to windows. Now i am stuck on 2200MHZ @200FSB with 1.75Vcore and 6-3-2-2 @ 200MHZ. Roomtemp. 20-23°C Idle 37°C ---- Load 39-42°C Cooler slk7 Nog iets dat ik niet begrijp is dat men Vcore in bios 1.75 is , in CPUZ = 1.6V MBM = Core1 : 1.6V --- Core2 : 1.8V Screen 1 screen 2 This is not so

13th February 2004, 00:35	#29
Tum0r Posts: n/a	mod your psu rails upping the 3.3 to a nice 3.5 will help u get a better fsb... upping the 5V helps when u oc a radeon upping the 12v looks good all and all it a very easy mod @ xtreme

13th February 2004, 10:52	#30
FreeStyler Posts: n/a	And you could throw your PC into a nuclear reactor. The extra energy might squeeze out a couple of extra MHz. But it will most likely hurt the PC in the end.