Stuck - Page 2

187(V)URD@ · 9th January 2004, 15:30

Wel prime and memtest are for later because i need to study

.

did some quick tests :

CPU :

Mem :

I think the memory is quite low.

p.s: Artifacts when running 3Dmark2001

187(V)URD@ · 9th January 2004, 16:00

Aquamark is lower now , weird.

GFX points are lower then when i didn't overclock fsb & cpu

EDIT :Prime locks up

EDIT : 11.5*190 , stable and doesn't lock up, maybe fsb can't keep up.
Should a flash bios for higher fsb ?

187(V)URD@ · 9th January 2004, 17:56

Just tested my GF and overclocked it @ 265/580 , no artifacts and lockups (11.5*190fsb) , ran aquamark => +1700 points.

So I think my fsb isn't stable @200MHZ and my cpu isn't that hot @2200MHZ (40° idle).

incase you didn't noticed i am nooboverclocker

jmke · 9th January 2004, 17:58

EN -> NL

187(V)URD@ · 10th January 2004, 13:55

Blame school jmke

11th January 2004, 13:32

What's your chipsetvoltage?

187(V)URD@ · 11th January 2004, 15:24

1.75 in bios but windows programs are saying 1.8v.

But i think its my fsb because i ran prime95 whole day and didn't lock up @2200mhz (fsb 190).

11th January 2004, 17:37

Quote:

11.5*190 , stable and doesn't lock up, maybe fsb can't keep up.
Should a flash bios for higher fsb ?

Quote:

But i think its my fsb because i ran prime95 whole day and didn't lock up @2200mhz (fsb 190).

if you ran prime all day, and it didn't lock up, then it's NOT the CPU that's holding you down...mut be something else then...

Could you give me some specifications about the mem.??
the brand, speed...

187(V)URD@ · 11th January 2004, 21:17

Quote:

Originally posted by cR00zIFI><3r

if you ran prime all day, and it didn't lock up, then it's NOT the CPU that's holding you down...mut be something else then...

Could you give me some specifications about the mem.??
the brand, speed...

Its in my first post i think , if you wanna know more I have to take my ram out of the pc.

11th January 2004, 21:52

You should first run memtest, prime stresses both the CPU and memory (and off course the CPU mem bridge of th chipset)
First test full on low speed CPU and high speed FSB's.
Memtest prime and 3Dmark.
Then as you found the max FSB, up the multi to find max CPU.
Testing again memtest prime and 3dmark.

No-one said good overclocking was a quick fix.

9th January 2004, 16:00	#12
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Aquamark is lower now , weird. GFX points are lower then when i didn't overclock fsb & cpu EDIT :Prime locks up EDIT : 11.5190 , stable and doesn't lock up, maybe fsb can't keep up. Should a flash bios for higher fsb ? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

9th January 2004, 17:56	#13
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Just tested my GF and overclocked it @ 265/580 , no artifacts and lockups (11.5190fsb) , ran aquamark => +1700 points. So I think my fsb isn't stable @200MHZ and my cpu isn't that hot @2200MHZ (40° idle). incase you didn't noticed i am nooboverclocker __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

9th January 2004, 17:58	#14
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	EN -> NL __________________

10th January 2004, 13:55	#15
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Blame school jmke __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fix for When Pinned Jump List Items Get Stuck in Windows 7	jmke	WebNews	0	23rd October 2009 13:16
Intel Gulftown 6 cores 32nm stuck to DDR3 1066	jmke	WebNews	0	25th May 2009 11:40
system is getting stuck frequently	Bolded	Hardware/Software Problems, Bugs	2	30th March 2009 10:16
Stuck at 4GHz with the Phenom II X4 940...	jmke	WebNews	3	1st February 2009 03:33
Stuck at POST screen	agent #2	Hardware/Software Problems, Bugs	5	27th August 2006 12:16
WU's stuck ?	Belgatom	Site & Forum Feedback - Folding@Home	4	17th January 2003 00:47

9th January 2004, 15:30	#11
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Wel prime and memtest are for later because i need to study . did some quick tests : CPU : Mem : I think the memory is quite low. p.s: Artifacts when running 3Dmark2001

11th January 2004, 13:32	#16
Vulk Posts: n/a	What's your chipsetvoltage?

11th January 2004, 15:24	#17
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	1.75 in bios but windows programs are saying 1.8v. But i think its my fsb because i ran prime95 whole day and didn't lock up @2200mhz (fsb 190).

11th January 2004, 21:52	#20
FreeStyler Posts: n/a	You should first run memtest, prime stresses both the CPU and memory (and off course the CPU mem bridge of th chipset) First test full on low speed CPU and high speed FSB's. Memtest prime and 3Dmark. Then as you found the max FSB, up the multi to find max CPU. Testing again memtest prime and 3dmark. No-one said good overclocking was a quick fix.