GOD dajjjum! waterleaking extreme fun :) - Page 2

The Senile Doctor · 29th September 2003, 08:21

it really flushes out of it, even when you just fill it with water, and no pump activity

biCker · 29th September 2003, 11:15

sent it over, I'll fix it

The Senile Doctor · 29th September 2003, 11:45

sent to teus allready

you look at it and fix it if you can, and then I'll come get it back

THANX!

29th September 2003, 12:08

no problem, I'll finish my CPU block in a hassle so I can compare it with yours

The Senile Doctor · 29th September 2003, 16:52

ok

Take your time, coz I won't have time to come get it before next week.

comparison of your block with the best WC block on the market is a nice rev!

The Senile Doctor · 30th September 2003, 09:06

Hi Guy,

I'm extremely sorry to hear (and see) this.

I'm contacting DTek right away, and please do not worry they'll take care of it right away by sending you a new block.
I've fwded your message to them, and CCing this one also.

The only difference between the WhiteWater AMD and P4 versions is the P4 adapter kit, that's all. Meaning, the water block is the same but the P4 version comes with the addition of the P4 adapter plate. Also you've received the correct mounting hardware, but the manual is not updated.

I apologize for this inconvenience.

Please feel free to contact me,

regards ,

Bruce
Cooltechnica.com

30th September 2003, 22:30

fixed. barton 2500+ at 2gh, 1.7 effective vcore. 35° stressed with two radiators in the loop and a GPU/vidcard block. a small fan between the two radiators. whisper silent ;D

my slk800 with 40cfm delta at 5volt wasn't completely silent but it ran with PCM+ more then 15° hotter then that WW (zalman cooling compound)

The Senile Doctor · 30th September 2003, 22:36

it roxors when it works!

how did you attach it?

30th September 2003, 22:37

some bolts & nuts I've got for my DIY blocks

30th September 2003, 22:44

just gave it 1.92vcore. stressed temp after a few minutes: 39°

the temps will get higher after a while because my water hasn't heated up yet

29th September 2003, 08:21	#11
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	it really flushes out of it, even when you just fill it with water, and no pump activity __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

29th September 2003, 11:45	#13
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	sent to teus allready you look at it and fix it if you can, and then I'll come get it back THANX! __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

29th September 2003, 16:52	#15
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	ok Take your time, coz I won't have time to come get it before next week. comparison of your block with the best WC block on the market is a nice rev! __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

30th September 2003, 09:06	#16
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	Hi Guy, I'm extremely sorry to hear (and see) this. I'm contacting DTek right away, and please do not worry they'll take care of it right away by sending you a new block. I've fwded your message to them, and CCing this one also. The only difference between the WhiteWater AMD and P4 versions is the P4 adapter kit, that's all. Meaning, the water block is the same but the P4 version comes with the addition of the P4 adapter plate. Also you've received the correct mounting hardware, but the manual is not updated. I apologize for this inconvenience. Please feel free to contact me, regards , Bruce Cooltechnica.com __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

30th September 2003, 22:36	#18
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	it roxors when it works! how did you attach it? __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

29th September 2003, 11:15	#12
biCker [M] Reviewer Join Date: May 2002 Posts: 1,186	sent it over, I'll fix it

29th September 2003, 12:08	#14
TeuS Posts: n/a	no problem, I'll finish my CPU block in a hassle so I can compare it with yours

30th September 2003, 22:30	#17
TeuS Posts: n/a	fixed. barton 2500+ at 2gh, 1.7 effective vcore. 35° stressed with two radiators in the loop and a GPU/vidcard block. a small fan between the two radiators. whisper silent ;D my slk800 with 40cfm delta at 5volt wasn't completely silent but it ran with PCM+ more then 15° hotter then that WW (zalman cooling compound)

30th September 2003, 22:37	#19
TeuS Posts: n/a	some bolts & nuts I've got for my DIY blocks

30th September 2003, 22:44	#20
TeuS Posts: n/a	just gave it 1.92vcore. stressed temp after a few minutes: 39° the temps will get higher after a while because my water hasn't heated up yet

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Corsair® Launches 256GB Extreme Series SSD	jmke	WebNews	0	31st August 2009 09:19
OCZ Technology Introduces Intel Extreme Memory Profile (XMP) SODIMMs	jmke	WebNews	0	10th April 2009 16:42
Intel® X25-E Extreme SATA Solid-State Drive Starts Shipping	jmke	WebNews	6	16th October 2008 23:00
OCZ Technology Introduces the Latest DDR3 Kits within the Intel Extreme Memory Series	jmke	WebNews	0	3rd July 2008 10:13
Leadtek First to Bundle PX8600 GTS & PX8600 GT with Lost Planet™: Extreme Condition	jmke	WebNews	2	5th July 2007 18:05
Leadtek WinFast® PX8500 GT TDH Extreme	jmke	WebNews	0	21st June 2007 09:40
ASUS introduces Striker Extreme Motherboard	jmke	WebNews	1	15th November 2006 21:11
ECS KN1 Extreme motherboard	Sidney	WebNews	0	17th June 2005 18:05
Intel Discontinues Pentium 4 Extreme Edition in Older Form-Factor	jmke	WebNews	0	28th February 2005 14:27