Stefan Mileschin

USB hubs can hog large swathes of your desktop real-estate, and clutter it will cables, before you even realize. SilverStone thinks it has an answer to that, a new 4-port USB 3.0 SuperSpeed hub with a magnetic surface, that lets you latch it onto a SECC case. The new EP01 USB 3.0 hub from SilverStone features a hexagonal shape, with four of its sides holding downstream ports, one holding the upstream type-B connector, and one with a DC input that lets it support USB charging specification 1.2, which lets the hub detect a device that is capable of drawing more than 1,000 mA, and supplying it with that. This lets you charge your smartphones and tablets, which otherwise don't charge when plugged in to a PC. Measuring 71.6 x 63.3 x 19.5 mm (WxDxH), it weighs about 65 g.

Moving on, SilverStone unveiled a pair of extremely practical SATA power cables, the CP06-E2 and CP06-E4, pictured below in that order. The CP06-E2 has a male SATA connector on one end, connecting to your PSU; and two female SATA connectors on the other, with very little spacing between them. This helps in cases like 3.5-inch to 2x 2.5-inch convertors, where there's very little spacing between the two 2.5-inch bays, causing the long spaces between PSU cables to protrude out, or remain stiff. The CP06-E4 is a 4-connector variant of the cable.

http://www.techpowerup.com/188420/si...ripherals.html