ATP Unveils N600S-Series Industrial SSDs w/ MCU-Based Power Loss Protection

Stefan Mileschin · 20th February 2020, 09:57

ATP has revealed its new N600S-series SSDs for industrial and commercial applications. The industrial-grade SSDs are designed to offer high performance and write endurance while also offering extreme physical endurance, as well as extensive power loss protection (PLP) technology for electrical endurance.

ATP’s N600S-series drives are based on an NVMe 1.3 controller with eight NAND channels that supports Low-Density Parity-Check (LDPC) ECC with a 2 KB codeword, end-to-end data protection, and programmable RAID engine. The drives are set to be available in 120 GB, 240 GB, 480 GB, 960 GB, and 1920 GB configurations and offer sequential read/write performance of up to 3,420/3,050 MB/s, which would make them among the fastest M.2-2280 SSDs for embedded applications with a PCIe 3.0 x4 interface.

ATP plans to offer its N600S drives in in two versions: the N600Sc for commercial temperatures (0ºC - 70ºC) as well as the N600Si for industrial temperatures (-40ºC - 85ºC).

https://www.anandtech.com/show/15521...w-mcubased-plp

20th February 2020, 09:57	#1
Stefan Mileschin [M] Reviewer Join Date: May 2010 Location: Romania Posts: 153,575	ATP Unveils N600S-Series Industrial SSDs w/ MCU-Based Power Loss Protection ATP has revealed its new N600S-series SSDs for industrial and commercial applications. The industrial-grade SSDs are designed to offer high performance and write endurance while also offering extreme physical endurance, as well as extensive power loss protection (PLP) technology for electrical endurance. ATP’s N600S-series drives are based on an NVMe 1.3 controller with eight NAND channels that supports Low-Density Parity-Check (LDPC) ECC with a 2 KB codeword, end-to-end data protection, and programmable RAID engine. The drives are set to be available in 120 GB, 240 GB, 480 GB, 960 GB, and 1920 GB configurations and offer sequential read/write performance of up to 3,420/3,050 MB/s, which would make them among the fastest M.2-2280 SSDs for embedded applications with a PCIe 3.0 x4 interface. ATP plans to offer its N600S drives in in two versions: the N600Sc for commercial temperatures (0ºC - 70ºC) as well as the N600Si for industrial temperatures (-40ºC - 85ºC). https://www.anandtech.com/show/15521...w-mcubased-plp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SimplyNUC Unveils Sequoia: AMD Ryzen V-Series-Based UCFF PC	Stefan Mileschin	WebNews	0	15th November 2019 10:27
Goke Unveils Toshiba XL-Flash-Based NVMe SSDs: Ultra-Low Latency	Stefan Mileschin	WebNews	0	3rd October 2019 11:38
AMD unveils its Navi-based RX 5700 graphics card series	Stefan Mileschin	WebNews	0	11th June 2019 08:53
Micron unveils new 5100 series enterprise SSDs	Stefan Mileschin	WebNews	0	9th December 2016 16:26
Micron unveils three series of datacenter-oriented SSDs	Stefan Mileschin	WebNews	0	15th April 2016 10:40
Sony Unveils the SLW-M Series Consumer SSDs	Stefan Mileschin	WebNews	0	8th February 2016 07:09
TDK Unveils the SDS1B Series SATA 6Gbps SSDs	Stefan Mileschin	WebNews	0	11th May 2015 10:23
Silicon Power Unveils Slim Series SSDs	Stefan Mileschin	WebNews	0	25th March 2014 09:07
Greenliant Pushes MLC NAND-based NANDrive SSDs to Industrial Temperatures	Stefan Mileschin	WebNews	0	22nd August 2012 09:22
Biwin Announces Elite Series SATA III SSDs Based on the LSI SandForce SF-2281	Stefan Mileschin	WebNews	0	22nd March 2012 07:51