problem with OCZ pc4000VX gold

13th July 2005, 11:23

I bought myself 1Gb of that RAM last weekend. But yesterday my pc sudenly chrashed, and everytime I booted and try to do something my pc got a blue screen.

I tried to test these lats with super pi and other benches, but the result said that the RAM was stable.

Because my windows install was pretty f*cked up, I tried to reinstall windows (at that point I didn't knew it was a RAM problem). While windows was copying the files it allways stopped at 78% and said it could not copy the next files.
After I tried anything (even rebuilded my pc) I tried to replace my new RAM with my old RAM, and sudenly everything worked again.

Now I reinstalled windows and installed my new RAM again to test, and with every program I opened it gave errors like. "could not writte to memory" etc....

My windows install f*cked up again and now I just reinstalled windows again.

Someone know what can be the problem? Bad RAM? Not compatible with an NF7-S?

I just think it is bad RAM, because the RAM wasn't even able to do 200 fsb at 2-3-3-8 at 3.2V

piotke · 13th July 2005, 11:40

memtest 86 stable ?

jort · 13th July 2005, 17:30

put more voltage

no realy try 3.3 or something if you can

13th July 2005, 18:31

I tried 3,2 but it wasn't able to get 200 FSB with that voltage :grum:

My BH-5 does 250 2-2-2-5 at that voltage.

Someone want to trade them with 1GB BH-5

13th July 2005, 18:37

i guess the nf2 chipset cant handle 1gig of ram at 1T

13th July 2005, 19:42

Try command rate (T1) = Off (=T2)
Maybe they just run a bit hot, have a fan blowing some air over it and run memtest.

13th July 2005, 20:58

allready flashed new bios, problem stays.

13th July 2005, 21:22

did you flash it to a cpc off bios?

13th July 2005, 21:53

Ok , RAM is broken.

Just did a lot of testing.

tried the following setups with 3 different bioses.

modded with cpc
modded without cpc
standard abit bios

setups

2x OCZ 512MB (tried every slot combination)
1x OCZ stick 1 (tried every slot combination)
1x OCZ stick 2 (tried every slot combination)
1x OCZ stick 1 + 1x corsair 256MB
1x OCZ stick 2 + 1x corsair 256MB
1x OCZ stick 1 + 2x corsair 256MB (to test if the 1GB problem is true)
1x OCZ stick 2 + 2x corsair 256MB (to test if the 1GB problem is true)

All the setups with stick 2 failed. With stick 2 only I got a reboot as soon as windows started. If I use stick 2 with other memory sticks it doesn't crash very quick, but ones I start some memory hungry program I get a reboot.

Conclusion: memory stick 2 is
:grum:

13th July 2005, 11:23	#1
kr15t0f Posts: n/a	problem with OCZ pc4000VX gold I bought myself 1Gb of that RAM last weekend. But yesterday my pc sudenly chrashed, and everytime I booted and try to do something my pc got a blue screen. I tried to test these lats with super pi and other benches, but the result said that the RAM was stable. Because my windows install was pretty fcked up, I tried to reinstall windows (at that point I didn't knew it was a RAM problem). While windows was copying the files it allways stopped at 78% and said it could not copy the next files. After I tried anything (even rebuilded my pc) I tried to replace my new RAM with my old RAM, and sudenly everything worked again. Now I reinstalled windows and installed my new RAM again to test, and with every program I opened it gave errors like. "could not writte to memory" etc.... My windows install fcked up again and now I just reinstalled windows again. Someone know what can be the problem? Bad RAM? Not compatible with an NF7-S? I just think it is bad RAM, because the RAM wasn't even able to do 200 fsb at 2-3-3-8 at 3.2V

13th July 2005, 11:40	#2
piotke [M] Reviewer Join Date: Jun 2002 Posts: 5,003	memtest 86 stable ? __________________ .

13th July 2005, 17:30	#3
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	put more voltage no realy try 3.3 or something if you can __________________ watercooling, chilled water,direct phase change, cascade, custom modding

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OCZ Technology Introduces Premium Gold Series Secure Digital High Capacity (SDHC)	jmke	WebNews	0	14th December 2008 13:34
OCZ Technology Introduces New DDR2 Gold and Platinum 4GB Quad Kits	jmke	WebNews	0	11th July 2007 11:14
OCZ announces new DDR2 Modules - PC2-6400 Gold Rev.2 GX	thorgal	WebNews	0	18th October 2006 11:03
boot problem after install OCZ booster	Desert Eagle	Hardware/Software Problems, Bugs	1	6th July 2005 03:26
OCZ Announces PC3200 Gold Series with 2-2-2 Timings	jmke	WebNews	0	24th March 2005 10:16
OCZ Announces EL PC-3200 Voltage eXtreme Gold Edition	jmke	WebNews	5	31st December 2004 12:26
OCZ Gold PC3700 Rev3	jmke	WebNews	0	5th December 2004 16:22
OCZ 3700 Gold Rev. 3: DDR500 Value for Athlon 64 & Intel 478	jmke	WebNews	0	26th September 2004 22:36
OCZ Announces PC-4400 Gold Limited Edition CL2.5 EL DDR	jmke	WebNews	0	13th April 2004 09:00
OCZ EL DDR PC-3700 / 466mhz / Gold Edition / Dual Channel / Revision 2	jmke	Articles & Howto's	7	26th December 2003 18:56

13th July 2005, 18:31	#4
kr15t0f Posts: n/a	I tried 3,2 but it wasn't able to get 200 FSB with that voltage :grum: My BH-5 does 250 2-2-2-5 at that voltage. Someone want to trade them with 1GB BH-5

13th July 2005, 18:37	#5
Nazaar Posts: n/a	i guess the nf2 chipset cant handle 1gig of ram at 1T

13th July 2005, 19:42	#6
wutske Posts: n/a	Try command rate (T1) = Off (=T2) Maybe they just run a bit hot, have a fan blowing some air over it and run memtest.

13th July 2005, 20:58	#7
kr15t0f Posts: n/a	allready flashed new bios, problem stays.

13th July 2005, 21:22	#8
Nazaar Posts: n/a	did you flash it to a cpc off bios?

13th July 2005, 21:53	#9
kr15t0f Posts: n/a	Ok , RAM is broken. Just did a lot of testing. tried the following setups with 3 different bioses. modded with cpc modded without cpc standard abit bios setups 2x OCZ 512MB (tried every slot combination) 1x OCZ stick 1 (tried every slot combination) 1x OCZ stick 2 (tried every slot combination) 1x OCZ stick 1 + 1x corsair 256MB 1x OCZ stick 2 + 1x corsair 256MB 1x OCZ stick 1 + 2x corsair 256MB (to test if the 1GB problem is true) 1x OCZ stick 2 + 2x corsair 256MB (to test if the 1GB problem is true) All the setups with stick 2 failed. With stick 2 only I got a reboot as soon as windows started. If I use stick 2 with other memory sticks it doesn't crash very quick, but ones I start some memory hungry program I get a reboot. Conclusion: memory stick 2 is :grum: