windwithme’s Core i7 review Part 7 - Foxconn’s Flaming Blade locked and loaded!!

windwithme · 17th June 2009, 17:50

It’s almost 5 months that Intel launched their Core i7 CPU into market.
Almost all the motherboard manufactures are so earnest to make X58 platform for the brand new Core i7 processor.

Intel is positioning i7 as a high-end product, consumers think the same too.
Before the new mainstream –LGA 1156 with P55 MB coming out,
currently it will still be LGA 755 to dominate the Intel CPU’s middle-to-entry level segment market.

Foxconn launched an X58 model earlier, named BloodRAGE. Based on current available X58 MBs out there with the price range from USD 200 ~ 300,
BloodRAGE is the highest priced one. Therefore, Foxconn’s strategy is to make up their high end product line with lower-priced X58 MBs.

This time the man in the spotlight is Foxconn’s latest X58 with a more affordable price under USD200: Quantum Force Flaming Blade.

Quite a great bulk for a product package.
Every new product comes with a different key image. Foxconn has given mush thoughts to it.

Accessories inside.
Manual, easy guide, software CD ROM, bridge, IO shield and cables.

Flaming Blade in the flash.
The components on the MB nicely collocated with color red or black, creates a strong gaming image.

MB bottom left
2 X PCI-E X16
( support 2* 16X ATI CrossFire & Nvidia SLI 2* 16X multi VGA technology)
1 X PCI-E X4
1 X PCI-E X1
2 X PCI
Networking chip - Realtek RTL8111C
Audio chip - Realtek ALC888，support 7.1 Channel HD

MB bottom right
6 X SATAII(ICH10R，suuport Raid 0/1/5/10)
1 X IDE
POWER/RESET button、DeBug LED… etc.

MB upper right
3 x DIMM DDR3，supports 1333/1600/1800 with up to 12GB.

Foxconn adopts a different 3 DIMM design from other X58 MBs, which is exactly what Intel recommended for the most optimized design.

3 DIMM design will get higher performance on basic confirgurations. Beside, it also helps enhance the overclocking capability.

MB upper left
LGA 1366 CPU socket. Foxconn provides additional LGA775 CPU cooler socket to reduce the hassles of changing between coolers.

CPU uses 6 phase PWM, it’s enough for all Core i7 available currently.

IO
8 X USB 2.0
2 X Gigabit LAN，supports Teaming Function
2 X eSATA
The black button in the center is clear CMOS.

windwithme · 17th June 2009, 18:22

Heatsink with style and texture

Flaming Blade boot-up screen

BIOS page

OC setting page

CPU Feature

DDR3 timing setting page, XMP(Extreme Memory Profile) is there, too.

The voltage page
CPU Core Voltage +10~1260mV(CPU maximum 2.44750V)
CPU VTT Voltage +10~1260mV
DRAM Voltage 1.50~2.86V(after 1.60V the interval is 0.01V)
CPU Vdroop Compensation, That is a function for CPU to maintain a stability environment when CPU is in a heavy voltage loading status.
X58 IOH Core Voltage 1.10~2.36V

OC Gear
There are 8 storage sections for users to save different settings.

Hardware Monitor

Above is my settings in Flaming Blade, CPU/DRAM 200/2000 stable.
Yet due to CPU, DDR3 may have slightly difference one another, each combination may need still adjustments in the voltage.

I spent some time to optimize the setting, for you guys’ reference.

Test bed configuration
CPU: Intel Core i7 950
MB: FOXCONN Quantum Force Flaming Blade
DRAM: CORSAIR Dominator 2GBX3 DDR3 1866C9D
VGA: MSI R4650-MD1G CrossFire
HD: Intel X25-M 80GB
POWER: Corsair HX520W Modular Power Supply
Cooler: Megahalems

windwithme · 17th June 2009, 18:38

Foxconn software, driver installation page

Applications

AEGISPANEL
Foxconn own-developed software, features overclocking, hardware monitor… functions. You can also

FOX LOGO. Users can change the boot-up screens here.

about DRAM
CORSAIR Dominator 2GBX3 DDR3 1866C9D
Official spec is DDR3 1866 CL9 9-9-24 1.65V.
DDR3 1871 CL8 8-8-24 1T，1.66V
SP2004 3 X Blend mode, 5.64G full loading stable.

DDR3 1871 CL8 8-8-24 1T
Sandra Memory Bandwidth-32970MB/s
EVEREST Memory Read-19525MB/s

DDR3 2001 CL9 9-9-24 1T，168V
SP2004 3 X Blend mode, 5.83G full loading stable.

DDR3 2001 CL9 9-9-24 1T
Sandra Memory Bandwidth-34848MB/s
EVEREST Memory Read-21056MB/s

DDR3 2129 CL9 9-9-24 1T
Sandra Memory Bandwidth-36621MB/s
EVEREST Memory Read-21460MB/s

Flaming Blade is quite strong at DDR3 overclocking, but the only flaw is the voltage at higher end.
My ideal voltage is 1.65V with DDR3 2000.

The performance score is quite stunning, especially with 6GB DDR3 2129 still could boot up adequately and got into OS. This is a thumbs-up.

windwithme · 17th June 2009, 18:45

about CPU
Intel Core i7 950 D0 OC 200X21=>4203Mhz
DDR3 2001 CL9 9-9-24 1T

CrystalMark 2004R3

CINEBENCH R10

200/2000
Hyper PI 8 X 32M，HT ON.

181X24=>4349Mhz
DDR3 1816 CL8 8-8-24 1T
Hyper PI 4 X 32M，HT OFF.

There are significant improvement stable under 1.3V when OC to 4000Mhz, 4349Mhz when OC to the limit, pass quad core PI 32M.

About 3D:
I took a look on the performance of ATI Latest 4650. About the others like 4870x2, 4870, 4850, 9600GT....etc. I match them with the text X8

MSI R4650-MD1G CrossFire

3DMARK2006

3DMARK VANTAGE

Crysis Benchmark

Need for Speed Undercover
1920X1200
Anti-Aliasing 4X

ATI4650 is quite a mid-range VGA. Hope the price of it can be almost the same to 4670, hence, the C/P ratio will be better.
The C/P ratio of 4670/ 4830 is still higher than others.

FOXCON Quantum Force Flaming Blade conclusion
Merits:
1)The packing design is real high quality. And the price is under USD200 too.
2)The options of BIOS are various. Particular the voltage part, OC ability is quite good too.
3)Supports both ATI Crossfire and NV SLI too. Good to gamers all the time.
4)Features with Japanese solid state capacitor. Power/ Reset/ Cmos buttons.
5)Good connectivity: 6 x SATAII, 2 x eSATA, 8 x USB2.0

Drawbacks
1) Foxconn Motherboard is not that easy to be seen in the channel market.
2) no 1394 at this time….
3) hope there will be a 6 DIMM version for DDR3.

Performance ★★★★★★★★★☆
Components using★★★★★★★☆☆☆
Outlook ★★★★★★★★★☆
C/P ratio ★★★★★★★★★☆

Most X58 mobos on the market are all around USD200.
The Foxconn’s Flaming Blade produce under a OC level design, it’s only in a mid-range price. Further, this is this only X58 I gave a nine star to.
If more cheaper X58 motherboards are launched, it will be a good news to i7 users.

The most high-end model of Foxconn Quantum Force, the BloodRage priced USD300. Almost the top of the line..
of course the total structure is much better than Flaming Blade;
This time, they used 3 DIMM design for a better memory OC performance, but seems users not that appreciated for the special design.
The board design should a merit that most users will be agreeing… the red + black design. very sexy.

At the beginning, Quantum Force series positioning its products in the highest class of the Foxconn’s product line.
But this time Flaming Blade seems make a step down to mid-range price gaming product.
The Cost & performance ratio is a key that they considerate now.
That is a kind of improvement though. Enthusiast loves to see it.
Hope the Quantum Force P55 series will let us surprise with their “cost” and “performance”!

17th June 2009, 17:50	#1
windwithme Eastern OC Expert Join Date: Dec 2004 Posts: 1,096	windwithme’s Core i7 review Part 7 - Foxconn’s Flaming Blade locked and loaded!! It’s almost 5 months that Intel launched their Core i7 CPU into market. Almost all the motherboard manufactures are so earnest to make X58 platform for the brand new Core i7 processor. Intel is positioning i7 as a high-end product, consumers think the same too. Before the new mainstream –LGA 1156 with P55 MB coming out, currently it will still be LGA 755 to dominate the Intel CPU’s middle-to-entry level segment market. Foxconn launched an X58 model earlier, named BloodRAGE. Based on current available X58 MBs out there with the price range from USD 200 ~ 300, BloodRAGE is the highest priced one. Therefore, Foxconn’s strategy is to make up their high end product line with lower-priced X58 MBs. This time the man in the spotlight is Foxconn’s latest X58 with a more affordable price under USD200: Quantum Force Flaming Blade. Quite a great bulk for a product package. Every new product comes with a different key image. Foxconn has given mush thoughts to it. Accessories inside. Manual, easy guide, software CD ROM, bridge, IO shield and cables. Flaming Blade in the flash. The components on the MB nicely collocated with color red or black, creates a strong gaming image. MB bottom left 2 X PCI-E X16 ( support 2* 16X ATI CrossFire & Nvidia SLI 2* 16X multi VGA technology) 1 X PCI-E X4 1 X PCI-E X1 2 X PCI Networking chip - Realtek RTL8111C Audio chip - Realtek ALC888，support 7.1 Channel HD MB bottom right 6 X SATAII(ICH10R，suuport Raid 0/1/5/10) 1 X IDE POWER/RESET button、DeBug LED… etc. MB upper right 3 x DIMM DDR3，supports 1333/1600/1800 with up to 12GB. Foxconn adopts a different 3 DIMM design from other X58 MBs, which is exactly what Intel recommended for the most optimized design. 3 DIMM design will get higher performance on basic confirgurations. Beside, it also helps enhance the overclocking capability. MB upper left LGA 1366 CPU socket. Foxconn provides additional LGA775 CPU cooler socket to reduce the hassles of changing between coolers. CPU uses 6 phase PWM, it’s enough for all Core i7 available currently. IO 8 X USB 2.0 2 X Gigabit LAN，supports Teaming Function 2 X eSATA The black button in the center is clear CMOS. Last edited by windwithme : 18th June 2009 at 07:26.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Episode III of X58 war- The Foxconn Quantum Force BloodRage locked and loaded!!	windwithme	Hardware Overclocking and Case Modding	5	18th January 2009 18:47
Locked and loaded for 'Halo 3'	Sidney	WebNews	0	24th September 2007 18:43

17th June 2009, 18:22	#2
windwithme Eastern OC Expert Join Date: Dec 2004 Posts: 1,096	Heatsink with style and texture Flaming Blade boot-up screen BIOS page OC setting page CPU Feature DDR3 timing setting page, XMP(Extreme Memory Profile) is there, too. The voltage page CPU Core Voltage +10~1260mV(CPU maximum 2.44750V) CPU VTT Voltage +10~1260mV DRAM Voltage 1.50~2.86V(after 1.60V the interval is 0.01V) CPU Vdroop Compensation, That is a function for CPU to maintain a stability environment when CPU is in a heavy voltage loading status. X58 IOH Core Voltage 1.10~2.36V OC Gear There are 8 storage sections for users to save different settings. Hardware Monitor Above is my settings in Flaming Blade, CPU/DRAM 200/2000 stable. Yet due to CPU, DDR3 may have slightly difference one another, each combination may need still adjustments in the voltage. I spent some time to optimize the setting, for you guys’ reference. Test bed configuration CPU: Intel Core i7 950 MB: FOXCONN Quantum Force Flaming Blade DRAM: CORSAIR Dominator 2GBX3 DDR3 1866C9D VGA: MSI R4650-MD1G CrossFire HD: Intel X25-M 80GB POWER: Corsair HX520W Modular Power Supply Cooler: Megahalems

17th June 2009, 18:38	#3
windwithme Eastern OC Expert Join Date: Dec 2004 Posts: 1,096	Foxconn software, driver installation page Applications AEGISPANEL Foxconn own-developed software, features overclocking, hardware monitor… functions. You can also FOX LOGO. Users can change the boot-up screens here. about DRAM CORSAIR Dominator 2GBX3 DDR3 1866C9D Official spec is DDR3 1866 CL9 9-9-24 1.65V. DDR3 1871 CL8 8-8-24 1T，1.66V SP2004 3 X Blend mode, 5.64G full loading stable. DDR3 1871 CL8 8-8-24 1T Sandra Memory Bandwidth-32970MB/s EVEREST Memory Read-19525MB/s DDR3 2001 CL9 9-9-24 1T，168V SP2004 3 X Blend mode, 5.83G full loading stable. DDR3 2001 CL9 9-9-24 1T Sandra Memory Bandwidth-34848MB/s EVEREST Memory Read-21056MB/s DDR3 2129 CL9 9-9-24 1T Sandra Memory Bandwidth-36621MB/s EVEREST Memory Read-21460MB/s Flaming Blade is quite strong at DDR3 overclocking, but the only flaw is the voltage at higher end. My ideal voltage is 1.65V with DDR3 2000. The performance score is quite stunning, especially with 6GB DDR3 2129 still could boot up adequately and got into OS. This is a thumbs-up.

17th June 2009, 18:45	#4
windwithme Eastern OC Expert Join Date: Dec 2004 Posts: 1,096	about CPU Intel Core i7 950 D0 OC 200X21=>4203Mhz DDR3 2001 CL9 9-9-24 1T CrystalMark 2004R3 CINEBENCH R10 200/2000 Hyper PI 8 X 32M，HT ON. 181X24=>4349Mhz DDR3 1816 CL8 8-8-24 1T Hyper PI 4 X 32M，HT OFF. There are significant improvement stable under 1.3V when OC to 4000Mhz, 4349Mhz when OC to the limit, pass quad core PI 32M. About 3D: I took a look on the performance of ATI Latest 4650. About the others like 4870x2, 4870, 4850, 9600GT....etc. I match them with the text X8 MSI R4650-MD1G CrossFire 3DMARK2006 3DMARK VANTAGE Crysis Benchmark Need for Speed Undercover 1920X1200 Anti-Aliasing 4X ATI4650 is quite a mid-range VGA. Hope the price of it can be almost the same to 4670, hence, the C/P ratio will be better. The C/P ratio of 4670/ 4830 is still higher than others. FOXCON Quantum Force Flaming Blade conclusion Merits: 1)The packing design is real high quality. And the price is under USD200 too. 2)The options of BIOS are various. Particular the voltage part, OC ability is quite good too. 3)Supports both ATI Crossfire and NV SLI too. Good to gamers all the time. 4)Features with Japanese solid state capacitor. Power/ Reset/ Cmos buttons. 5)Good connectivity: 6 x SATAII, 2 x eSATA, 8 x USB2.0 Drawbacks 1) Foxconn Motherboard is not that easy to be seen in the channel market. 2) no 1394 at this time…. 3) hope there will be a 6 DIMM version for DDR3. Performance ★★★★★★★★★☆ Components using★★★★★★★☆☆☆ Outlook ★★★★★★★★★☆ C/P ratio ★★★★★★★★★☆ Most X58 mobos on the market are all around USD200. The Foxconn’s Flaming Blade produce under a OC level design, it’s only in a mid-range price. Further, this is this only X58 I gave a nine star to. If more cheaper X58 motherboards are launched, it will be a good news to i7 users. The most high-end model of Foxconn Quantum Force, the BloodRage priced USD300. Almost the top of the line.. of course the total structure is much better than Flaming Blade; This time, they used 3 DIMM design for a better memory OC performance, but seems users not that appreciated for the special design. The board design should a merit that most users will be agreeing… the red + black design. very sexy. At the beginning, Quantum Force series positioning its products in the highest class of the Foxconn’s product line. But this time Flaming Blade seems make a step down to mid-range price gaming product. The Cost & performance ratio is a key that they considerate now. That is a kind of improvement though. Enthusiast loves to see it. Hope the Quantum Force P55 series will let us surprise with their “cost” and “performance”!