prescott and black ice extreme

24th December 2004, 11:00

i just bought me a secondhanded black ice extreme to get more room in my case (instead of my heatercore)
but when i now compare those 2 , there is a HUGE difference in cooling area.
i'm doubting it can cool a P4 3.0 @ 3.8 prescott (will put out 150W on load?) and the chipset.
i want relative silence so a high cfm fan is not an option and yet i want max 55° (for stability and the thermal throtteling)

http://quarantaine.mongtastic.be/rads for the comparison pictures

anyone got an idea if this will work?

24th December 2004, 12:51

depends, what are your temps now?

24th December 2004, 13:09

Dunno if this is usefull.
http://www.overclockers.com/articles1140
(! For watts, multiply BTU/Hr x 0.2932

If you want to know the heat output of your cpu:
http://newstuff.orcon.net.nz/wCalc.html

tought 89W at stock speed and volt (1.4V) and 84W for the LGA version (same speed, same volt)

25th December 2004, 10:51

Quote:

Originally posted by koensa
tryd it here to, gpu and cpu with a single 120mm rad is not an option
it was a ti4600 and 3.0, then i took car rad and temps were much better

with bi i had around 65!!

bah, i bought that radiator for nothing then

i should think before acting next time...

24th December 2004, 11:00	#1
quarantaine Posts: n/a	prescott and black ice extreme i just bought me a secondhanded black ice extreme to get more room in my case (instead of my heatercore) but when i now compare those 2 , there is a HUGE difference in cooling area. i'm doubting it can cool a P4 3.0 @ 3.8 prescott (will put out 150W on load?) and the chipset. i want relative silence so a high cfm fan is not an option and yet i want max 55° (for stability and the thermal throtteling) http://quarantaine.mongtastic.be/rads for the comparison pictures anyone got an idea if this will work?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alphacool NexXxos BOLD vs Prescott, Intel's Black Sheep	jmke	Articles & Howto's	0	10th March 2005 12:59

24th December 2004, 12:51	#2
kristos Posts: n/a	depends, what are your temps now?

24th December 2004, 13:09	#3
wutske Posts: n/a	Dunno if this is usefull. http://www.overclockers.com/articles1140 (! For watts, multiply BTU/Hr x 0.2932 If you want to know the heat output of your cpu: http://newstuff.orcon.net.nz/wCalc.html tought 89W at stock speed and volt (1.4V) and 84W for the LGA version (same speed, same volt)