The Frozen Duck SS

nigel · 15th November 2009, 22:16

hi all,

wel het is zover, Ik ga voor de eerste keer onder de 0°C gaan

Ik zal deze treadh gebruiken om vragen te stellen en mijn resultaten te tonen.
Allereerst wil ik jullie voorstellen aan The Frozen Duck SS

Thanks again Piotres :up:

En zo begon ik met het isoleren van de socket. Aangezien dit mijn eerste keer is gaat dit vrij euhm traag

Na het isoleren (ja sorry ik vind mijn sd kaartje niet meer dus geen foto's van het afgewerkte isoleer werk

)
heb ik hier mijn eerste resultaten.

http://valid.canardpc.com/show_oc.php?id=828802

Wel ik ben al een blij iemand ^^
http://valid.canardpc.com/show_oc.php?id=828872

Oja let niet op het team aub, dit is tijdelijk. vermoedelijk opnieuw bij madshrimps komen.

enfin het gebruik van deze SS stelt mij in staat om meer op mijn gemak te overclocken.
Maakt mijn leven dus veel eenvoudiger

Maar ben nog steeds bang voor condens

en de eerste superpi resultaat

en het word steeds beter

http://valid.canardpc.com/show_oc.php?id=828907

En ben hierna gestopt om op mijn gemakske potje koffie en taart te nemen

Oja enige hints of tips om steeds hoger te komen?

ik ben nu met trial and error bezig

Voorlopig zonder succes, telkens BSOD bij het booten

O wel volgende week doe ik verder

nigel

Massman · 15th November 2009, 23:29

A few pointers.

Before you actually start benching for results or scores, make sure you know the limitations of your hardware individually. So:

- Check max BCLK
- Figure out how the uncore scales per MHZ and temperature
- Check how decent your RAM is: per volt, per timings
- Figure out initial limitations of your cpu for HT on, HT off and disabled cores
- Figure out what core is best

When you know the limitations of the setup, you know the size of your playing field. Then it's just a matter of trying out different combinations.

What temp is that SS capable of?

nigel · 15th November 2009, 23:33

Wil do that

only => - Check how decent your RAM is: per volt, per timings how do i do this?
This is somthing thats alway's giving me a (koppijn) headage.

And the ss => idle = -50°C a -55°C and load => -40°C a 45°C

Massman · 15th November 2009, 23:36

Depends on what type of memory you have. Elpida? Micron?

blind_ripper · 16th November 2009, 06:16

piotres builds great unit's, GL with it.

nigel · 16th November 2009, 15:31

@ Massman: hmm I am not sure :s Its corsair dominator memory TR3X6G1600C8D :unsure:

@blind_ripper: thanks

And just small update have been looking for BCLK and did small overclock ^^

nigel · 16th November 2009, 16:05

hmm intresting.
I unmounted the Evap and it seem I did not make full contact O.o

It seems the Evap was not mounted tight enough ore somthing O.o freaky

leeghoofd · 16th November 2009, 16:48

If you did that run in XP it would have been a bit better

... nice unit man, pretty jealous of it... them rams hould at least do 1600Mhz C8... My rev 2.1 hit abrick wall at 1680Mhz (upping volts, loosening times doesn't help) the Rev 2.2 of Gamer do 1900mhz C8 at 1.7 volts...

Who are Hardpoint OC ?

nigel · 16th November 2009, 17:09

Quote:

Originally Posted by leeghoofd

If you did that run in XP it would have been a bit better

... nice unit man, pretty jealous of it... them rams hould at least do 1600Mhz C8... My rev 2.1 hit abrick wall at 1680Mhz (upping volts, loosening times doesn't help) the Rev 2.2 of Gamer do 1900mhz C8 at 1.7 volts...

Who are Hardpoint OC ?

hehe ^^ yeah thats possible. But wel I am lazy

And thanks, i've been saving for that unit long and finaly got the balls to order it

And i am in love

and about the ram yeah they run at 1600Mhz ^^ but i lowerd them because I was not sure they would keep it al stable enough to bench and upload it

and hearing that makes me wanne remount the evap and start trying out the rams

And actually Hardpoint OC was part of somthing bigger.
During the summor me and some one else were planning on building a website for reviews, casemodding. He was going to do the code for the site and me the reviews. But wel he wel left me in the dark O.o
Sow the site and benchteam are dead

But the idea is stil alive, sow i made a blog for my reviews (the link is here on the forum). And wel I rejoined Madshrimps sow at least I could keep on benching and be part of a Belguim team

Gamer · 16th November 2009, 18:04

Quote:

Originally Posted by leeghoofd

If you did that run in XP it would have been a bit better

... nice unit man, pretty jealous of it... them rams hould at least do 1600Mhz C8... My rev 2.1 hit abrick wall at 1680Mhz (upping volts, loosening times doesn't help) the Rev 2.2 of Gamer do 1900mhz C8 at 1.7 volts...

Who are Hardpoint OC ?

Even more, we tested them at 2100 8-9-8 a few weeks back.

15th November 2009, 22:16	#1
nigel Member Join Date: Aug 2008 Location: Belguim => Zulte Posts: 221	The Frozen Duck SS hi all, wel het is zover, Ik ga voor de eerste keer onder de 0°C gaan Ik zal deze treadh gebruiken om vragen te stellen en mijn resultaten te tonen. Allereerst wil ik jullie voorstellen aan The Frozen Duck SS Thanks again Piotres :up: En zo begon ik met het isoleren van de socket. Aangezien dit mijn eerste keer is gaat dit vrij euhm traag Na het isoleren (ja sorry ik vind mijn sd kaartje niet meer dus geen foto's van het afgewerkte isoleer werk ) heb ik hier mijn eerste resultaten. http://valid.canardpc.com/show_oc.php?id=828802 Wel ik ben al een blij iemand ^^ http://valid.canardpc.com/show_oc.php?id=828872 Oja let niet op het team aub, dit is tijdelijk. vermoedelijk opnieuw bij madshrimps komen. enfin het gebruik van deze SS stelt mij in staat om meer op mijn gemak te overclocken. Maakt mijn leven dus veel eenvoudiger Maar ben nog steeds bang voor condens en de eerste superpi resultaat en het word steeds beter http://valid.canardpc.com/show_oc.php?id=828907 En ben hierna gestopt om op mijn gemakske potje koffie en taart te nemen Oja enige hints of tips om steeds hoger te komen? ik ben nu met trial and error bezig Voorlopig zonder succes, telkens BSOD bij het booten O wel volgende week doe ik verder nigel __________________ nigelpoint.blogspot.com :) http://www.hwbot.org/signature/u21315.png

15th November 2009, 23:29	#2
Massman [M] Reviewer Join Date: Nov 2004 Location: Waregem Posts: 6,466	A few pointers. Before you actually start benching for results or scores, make sure you know the limitations of your hardware individually. So: - Check max BCLK - Figure out how the uncore scales per MHZ and temperature - Check how decent your RAM is: per volt, per timings - Figure out initial limitations of your cpu for HT on, HT off and disabled cores - Figure out what core is best When you know the limitations of the setup, you know the size of your playing field. Then it's just a matter of trying out different combinations. What temp is that SS capable of? __________________

15th November 2009, 23:33	#3
nigel Member Join Date: Aug 2008 Location: Belguim => Zulte Posts: 221	Wil do that only => - Check how decent your RAM is: per volt, per timings how do i do this? This is somthing thats alway's giving me a (koppijn) headage. And the ss => idle = -50°C a -55°C and load => -40°C a 45°C __________________ nigelpoint.blogspot.com :) http://www.hwbot.org/signature/u21315.png

15th November 2009, 23:36	#4
Massman [M] Reviewer Join Date: Nov 2004 Location: Waregem Posts: 6,466	Depends on what type of memory you have. Elpida? Micron? __________________

16th November 2009, 06:16	#5
blind_ripper Member Join Date: Apr 2005 Posts: 1,338	piotres builds great unit's, GL with it. __________________ http://www.hwbot.org/signature/u5776.png

16th November 2009, 15:31	#6
nigel Member Join Date: Aug 2008 Location: Belguim => Zulte Posts: 221	@ Massman: hmm I am not sure :s Its corsair dominator memory TR3X6G1600C8D :unsure: @blind_ripper: thanks And just small update have been looking for BCLK and did small overclock ^^ __________________ nigelpoint.blogspot.com :) http://www.hwbot.org/signature/u21315.png

16th November 2009, 16:05	#7
nigel Member Join Date: Aug 2008 Location: Belguim => Zulte Posts: 221	hmm intresting. I unmounted the Evap and it seem I did not make full contact O.o It seems the Evap was not mounted tight enough ore somthing O.o freaky __________________ nigelpoint.blogspot.com :) http://www.hwbot.org/signature/u21315.png

16th November 2009, 16:48	#8
leeghoofd [M] Reviewer Join Date: Dec 2008 Posts: 3,209	If you did that run in XP it would have been a bit better ... nice unit man, pretty jealous of it... them rams hould at least do 1600Mhz C8... My rev 2.1 hit abrick wall at 1680Mhz (upping volts, loosening times doesn't help) the Rev 2.2 of Gamer do 1900mhz C8 at 1.7 volts... Who are Hardpoint OC ? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoolAge Frozen Orb X120 Transform X120TF CPU Cooler Review	jmke	WebNews	0	19th October 2009 11:24
Coolage Frozen Orb Z924 HDC Heatsink Review	jmke	WebNews	0	13th January 2009 21:00
RC Duck Decoys	jmke	WebNews	0	28th July 2008 09:20
Hell has frozen over - ATI R600 is here! HD 2900 XT Reviews	jmke	WebNews	16	15th May 2007 13:37
ATI RD600 might be a dead duck	jmke	WebNews	0	8th September 2006 19:06
van vrzone : frozen liquid cooling	The Senile Doctor	Hardware Overclocking and Case Modding	2	19th January 2003 20:56