AMD XP Mobile overclocking

187(V)URD@ · 2nd March 2005, 16:30

Recently I had a
XP2500+ M IQZFA 0349TPMW with a NF7 rev2.0 (steel bracket)

My XP maxed out @ 2600MHZ and mobo @ 245MHZ.

Now that mobo died recently and I got also a new proc.

My setup now is :

XP2600+ M IQYHA 0348XPMW
Abit nf7 rev2.0 (with plastic bracket

)
2*256MB BH5

I got some troubles with ocing and i think my mobo is the ev0l one :grin: .

It maxxes out @ 230-235mhz with modded bios wich is certainly not high.

I can up my clockspeed to 2800mhz in windows under 1.9V then i got a bluescreen.
BUt my Vcore fluctuates very hard, it isn't the psu because i had stable Vcore on my last nf7.
Example : bios 1.85V gives in windows 1.86 and drops to 1.808V

.
EDIT : seems when I stress the cpu @ 100% my vcore stays 1.8V.

Sometimes when i boot on a high overclock(starting from 2.6ghz) some programs giving application error (0xxx000....) 'geheugenfout' or something.

Also when I first tested the cpu I booted on 200*13 and I had no problems. If I try that now my pc begins to beep and I have to clear CMOS.
Seems he doesn't like my 13 anymore :/.

My BH5 can go 240-245 on 2.9V (overvolts) so i don't think its my memory problem.

someone can give me some tips?

jmke · 2nd March 2005, 16:34

2.8ghz should be possible with better cooling no?

Sidney · 2nd March 2005, 16:37

Don't know what to tell ya but here is mine; same mobo model

AXP-M 2600+ been running at 260X Ghz 217x12 after I tested the Transformer case. I have had used 3rd party bios and pushed it to 235 mhz. I found the performance is lacking with higher FSB. Vcore to run at 2.6 Ghz is 1.875, a bit high for my liking but CPU temp is decent 38C idle and 46 C load, 100% air cooling of course.

I DO use MOSFET heatsinks.

187(V)URD@ · 2nd March 2005, 16:39

I got watercooling but i think my Vcore is killing me because it isn't stable.

I got watercooling (frigus engineering) so I don't want to change that since my temps are reasonable.
Maybe i can buy a nexxos but I doubt it will change something about my oc's.

24° roomtemp
36° idle
47° stressed with m&n

This on 2500MHZ.

And yes 2.8ghz seems to be possible, atleast yesterday :|.

Sidney · 2nd March 2005, 16:48

I ran @2.8Ghz just for a minute @2 Volt.

If it is not stable I don't say it. What is the point in having something that runs only occasionally

Like owning a stallion only would run fast to the North but not other directions.

A WILLING processor is key ...... all other elements are secondary.

jmke · 2nd March 2005, 16:51

should get below 40°C temps for seeing an increase of OC.

47 is too high

"in the old days" I got an XP1600+ running at 1700Mhz with "normal" (temps=45-50) aircooling and 1800Mhz with "extreme" aircooling.(temps 38-40)
http://www.madshrimps.be/upload/jmke/PC/newsys.php

187(V)URD@ · 2nd March 2005, 16:54

personnaly i wanted to bench @ 2.7GHZ to break my previous 3DK01 record (15.6K with my Ti4200).

I was hoping @ 245FSB and 2.7GHZ but since the fsb thingie didn't work I tried hard mhz

.

Now I can boot from 2.7ghz but I get an error when I try to run 3DK01 (MFC error or smth).

I am now using bios 27 from abit, seems to be faster then D23-3D bios.

I am trying to find my sweet spot

Btw : I am now on 1.85-1.9V on 200*13 so mp 13 isn't a problem. (need to stress it tho).

EDIT : My temps are 36-40° when I do normal stuff on my pc and 42° when I game.

187(V)URD@ · 2nd March 2005, 16:57

just tested s&m on 2600mhz, went fine but vcore drops to 1.824 (bios 1.9V)

Also my system rebooted on his own saying : you got 59seconds to save your work and something about autorized/system.

You know the screen when you're shutting something down when windows needs it.

How come this happend ?

jmke · 2nd March 2005, 17:00

set vcore to 2v , try again

187(V)URD@ · 2nd March 2005, 17:15

2.7GHZ @ 1.968V(2.06V in bios) was no go , win32k.sys error .

2nd March 2005, 16:30	#1
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	AMD XP Mobile overclocking Recently I had a XP2500+ M IQZFA 0349TPMW with a NF7 rev2.0 (steel bracket) My XP maxed out @ 2600MHZ and mobo @ 245MHZ. Now that mobo died recently and I got also a new proc. My setup now is : XP2600+ M IQYHA 0348XPMW Abit nf7 rev2.0 (with plastic bracket ) 2256MB BH5 I got some troubles with ocing and i think my mobo is the ev0l one :grin: . It maxxes out @ 230-235mhz with modded bios wich is certainly not high. I can up my clockspeed to 2800mhz in windows under 1.9V then i got a bluescreen. BUt my Vcore fluctuates very hard, it isn't the psu because i had stable Vcore on my last nf7. Example : bios 1.85V gives in windows 1.86 and drops to 1.808V . EDIT : seems when I stress the cpu @ 100% my vcore stays 1.8V. Sometimes when i boot on a high overclock(starting from 2.6ghz) some programs giving application error (0xxx000....) 'geheugenfout' or something. Also when I first tested the cpu I booted on 20013 and I had no problems. If I try that now my pc begins to beep and I have to clear CMOS. Seems he doesn't like my 13 anymore :/. My BH5 can go 240-245 on 2.9V (overvolts) so i don't think its my memory problem. someone can give me some tips? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

2nd March 2005, 16:34	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	2.8ghz should be possible with better cooling no? __________________

2nd March 2005, 16:37	#3
Sidney Member Join Date: Mar 2004 Posts: 15,738	Don't know what to tell ya but here is mine; same mobo model AXP-M 2600+ been running at 260X Ghz 217x12 after I tested the Transformer case. I have had used 3rd party bios and pushed it to 235 mhz. I found the performance is lacking with higher FSB. Vcore to run at 2.6 Ghz is 1.875, a bit high for my liking but CPU temp is decent 38C idle and 46 C load, 100% air cooling of course. I DO use MOSFET heatsinks. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

2nd March 2005, 16:39	#4
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	I got watercooling but i think my Vcore is killing me because it isn't stable. I got watercooling (frigus engineering) so I don't want to change that since my temps are reasonable. Maybe i can buy a nexxos but I doubt it will change something about my oc's. 24° roomtemp 36° idle 47° stressed with m&n This on 2500MHZ. And yes 2.8ghz seems to be possible, atleast yesterday :\|. __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

2nd March 2005, 16:48	#5
Sidney Member Join Date: Mar 2004 Posts: 15,738	I ran @2.8Ghz just for a minute @2 Volt. If it is not stable I don't say it. What is the point in having something that runs only occasionally Like owning a stallion only would run fast to the North but not other directions. A WILLING processor is key ...... all other elements are secondary. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

2nd March 2005, 16:51	#6
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	should get below 40°C temps for seeing an increase of OC. 47 is too high "in the old days" I got an XP1600+ running at 1700Mhz with "normal" (temps=45-50) aircooling and 1800Mhz with "extreme" aircooling.(temps 38-40) http://www.madshrimps.be/upload/jmke/PC/newsys.php __________________

2nd March 2005, 16:54	#7
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	personnaly i wanted to bench @ 2.7GHZ to break my previous 3DK01 record (15.6K with my Ti4200). I was hoping @ 245FSB and 2.7GHZ but since the fsb thingie didn't work I tried hard mhz . Now I can boot from 2.7ghz but I get an error when I try to run 3DK01 (MFC error or smth). I am now using bios 27 from abit, seems to be faster then D23-3D bios. I am trying to find my sweet spot Btw : I am now on 1.85-1.9V on 20013 so mp 13 isn't a problem. (need to stress it tho). EDIT : My temps are 36-40° when I do normal stuff on my pc and 42° when I game. __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

2nd March 2005, 16:57	#8
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	just tested s&m on 2600mhz, went fine but vcore drops to 1.824 (bios 1.9V) Also my system rebooted on his own saying : you got 59seconds to save your work and something about autorized/system. You know the screen when you're shutting something down when windows needs it. How come this happend ? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

2nd March 2005, 17:00	#9
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	set vcore to 2v , try again __________________

2nd March 2005, 17:15	#10
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	2.7GHZ @ 1.968V(2.06V in bios) was no go , win32k.sys error . __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Announces Widespread Availability and Broad Global OEM Support for New Quad-Core	jmke	WebNews	0	13th November 2008 17:17
Toshiba Laptops Start Using AMD Turion™ X2 Ultra Dual-Core Mobile Processors	jmke	WebNews	0	30th July 2008 11:50
AMD GAME! Enables Console-like Simplicity for Mainstream PCs	jmke	WebNews	9	19th May 2008 21:51
AMD Introduces ‘AMD Business Class’, Designed With Business in Mind	jmke	WebNews	0	28th April 2008 10:33
ATI's Radeon® Xpress 200M Drives HP's New Thin-and-Light AMD TurionT 64 Mobile	jmke	WebNews	0	22nd June 2005 18:08
AMD New 64-Bit Mobile Processor for High-Performance Notebook PCs	Sidney	WebNews	0	14th April 2005 09:02
AMD Rings In The Season With A New Mobile AMD Sempron™ Processor	jmke	WebNews	0	23rd November 2004 17:30
AMD Rewrites the Rules for Notebook Performance	Sidney	WebNews	0	20th July 2004 04:52
AMD Athlon 2500+ Mobile Overclocking Experiences	jmke	WebNews	1	14th May 2004 16:49
new low-power mobile AMD Athlon™ XP-M processor 2100+	jmke	WebNews	0	19th March 2004 18:35