amd 3000 problem

26th October 2005, 23:46

im having problems overclocking.im new to it so dont laugh.i currently have it set from 1.8 to 2.0

case: thermaltake armor

motherboard:soltek k8tpro-939

psu:500w i dont know what kind though

memory:xms 512 pc 4000:timing is 3.0 4 4 10

cooling:asetek triple radiator water cooling

graffix:geforce 6200 water cooled/w heat sinks on memory

bios

henix award

i have my vcore set at like 1.6 the vdimm is at like 2.7 my memory is set to 166. i upped the frequency to 223 which gave me 2 gigs.now i ran the torcher test for like a day and it said 1 error.now when i run the 3d mark test it wont work my computer reboots.i dont know if i can lock the graffix card like i keep reading about people doing 66/33 or something.i only saw a setting to enable or disable agp/pci clock.will that work if i disable it.any help with this or if you know a better way please help.also after i up my frequency my computer sometimes says recovered from a error.whats that?

Sidney · 27th October 2005, 00:32

It really doesn't matter what you use for cooling as long as you list CPU temp so that people can help ID'ing the potential problem. Besides, there is practically not much heat from S-939 running 15% overclock and the GForce 6200 is the same.

The way I see it -
1) Memory can be set at 200 making them run at 230 Mhz is below PC4000 rated default speed.
2)

Quote:

i upped the frequency to 223 which gave me 2 gigs.now

What does this mean?
3) AGP/PCI should be locked
4) Recovery from an error or system crashed meaning your system is unstable.
5) 1.6V is high unless you have good CPU temp.

Others may jump in to offer help. By the way, welcome to the forum

27th October 2005, 00:47

i meant in the bios it says cpu frequency.i changed it from 200 to 223 to get 2.01g.my temp is anywhere between 40 to 50 c.so like isaid when im in bios i only have a choice to enable or disable pci/agp clock.i should disable it.i also ran my computer for like 36 hours on prime and got 1 error.but like i said when i run 3d mark it wont work itll load up then the screen will go blank and my computer will reboot.thanx for your help and the welcome.

Sidney · 27th October 2005, 01:11

PCI/AGP = enable lock if present

What are the settings in Vcard? Or, reinstall 3DMark.

27th October 2005, 01:19

the vid card settings are set to optimal in bios.i havnt messed with that much yet i tried to change it b4 from 128 to 256 but it didnt change when i ran 3d mark it still rebooted.

Sidney · 27th October 2005, 02:04

Read this, may help you understand BIOS settings

http://www.rojakpot.com/default.aspx?location=7&var1=18

27th October 2005, 02:39

thanx im going to try a few things will update in a while.

jort · 27th October 2005, 07:15

changed you ltd muliplier from 5 x to 3x?

DUR0N · 27th October 2005, 11:17

soltek k8tpro-939= K8T800 right? Overclocks about as much as my cup of coffee here.

27th October 2005, 14:27

i changed the drive strength on the graffix card to max in bios and now atleast i can score in 3d mark before i just rebooted.thanx for the link lazy helped alot with my vid card problem.and yes it is k8t800 pro.i know its cheap but all i could get on short notice.a friend messed up the msi board i had.he got thermal paste all over the board.dont ask me how he just did.im looking into the getting a new board.ASUS A8N32-SLI DELUXE.

26th October 2005, 23:46	#1
kdogg23 Posts: n/a	amd 3000 problem im having problems overclocking.im new to it so dont laugh.i currently have it set from 1.8 to 2.0 case: thermaltake armor motherboard:soltek k8tpro-939 psu:500w i dont know what kind though memory:xms 512 pc 4000:timing is 3.0 4 4 10 cooling:asetek triple radiator water cooling graffix:geforce 6200 water cooled/w heat sinks on memory bioshenix award i have my vcore set at like 1.6 the vdimm is at like 2.7 my memory is set to 166. i upped the frequency to 223 which gave me 2 gigs.now i ran the torcher test for like a day and it said 1 error.now when i run the 3d mark test it wont work my computer reboots.i dont know if i can lock the graffix card like i keep reading about people doing 66/33 or something.i only saw a setting to enable or disable agp/pci clock.will that work if i disable it.any help with this or if you know a better way please help.also after i up my frequency my computer sometimes says recovered from a error.whats that?

27th October 2005, 01:11	#4
Sidney Member Join Date: Mar 2004 Posts: 15,738	PCI/AGP = enable lock if present What are the settings in Vcard? Or, reinstall 3DMark. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

27th October 2005, 02:04	#6
Sidney Member Join Date: Mar 2004 Posts: 15,738	Read this, may help you understand BIOS settings http://www.rojakpot.com/default.aspx?location=7&var1=18 __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

27th October 2005, 07:15	#8
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	changed you ltd muliplier from 5 x to 3x? __________________ watercooling, chilled water,direct phase change, cascade, custom modding

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Phenom II AM3 Memory Problem Fix Out Soon	jmke	WebNews	0	13th February 2009 20:12
AMD Launches 45nm Triple Core Phenom II with DDR3 support	jmke	WebNews	0	9th February 2009 10:26
AMD Announces Widespread Availability and Broad Global OEM Support for New Quad-Core	jmke	WebNews	0	13th November 2008 17:17
AMD GAME! Enables Console-like Simplicity for Mainstream PCs	jmke	WebNews	9	19th May 2008 21:51
AMD Introduces ‘AMD Business Class’, Designed With Business in Mind	jmke	WebNews	0	28th April 2008 10:33
AMD Launches World’s First x86 Triple-Core Processors	jmke	WebNews	0	27th March 2008 16:16
AMD Aligns AMD Phenom, ATI Radeon HD 3000 Launch	jmke	WebNews	0	9th November 2007 11:54
AMD Introduces Three New Dual-Core AMD Opteron™ Processors	jmke	WebNews	0	12th March 2006 20:25
HOWTO: Troubleshoot Any Networking Problem	jmke	FAQ / INFO / HOW-TO	0	15th February 2006 14:33
AMD Introduces Line of Low-Power, High-Performance AMD Geode Embedded x86 Processors	Sidney	WebNews	0	24th May 2004 07:10

27th October 2005, 00:47	#3
kdogg23 Posts: n/a	i meant in the bios it says cpu frequency.i changed it from 200 to 223 to get 2.01g.my temp is anywhere between 40 to 50 c.so like isaid when im in bios i only have a choice to enable or disable pci/agp clock.i should disable it.i also ran my computer for like 36 hours on prime and got 1 error.but like i said when i run 3d mark it wont work itll load up then the screen will go blank and my computer will reboot.thanx for your help and the welcome.

27th October 2005, 01:19	#5
kdogg23 Posts: n/a	the vid card settings are set to optimal in bios.i havnt messed with that much yet i tried to change it b4 from 128 to 256 but it didnt change when i ran 3d mark it still rebooted.

27th October 2005, 02:39	#7
kdogg23 Posts: n/a	thanx im going to try a few things will update in a while.

27th October 2005, 11:17	#9
DUR0N Member Join Date: May 2002 Posts: 1,543	soltek k8tpro-939= K8T800 right? Overclocks about as much as my cup of coffee here.

27th October 2005, 14:27	#10
kdogg23 Posts: n/a	i changed the drive strength on the graffix card to max in bios and now atleast i can score in 3d mark before i just rebooted.thanx for the link lazy helped alot with my vid card problem.and yes it is k8t800 pro.i know its cheap but all i could get on short notice.a friend messed up the msi board i had.he got thermal paste all over the board.dont ask me how he just did.im looking into the getting a new board.ASUS A8N32-SLI DELUXE.