6800 to 6800 Ultra mod

30th September 2004, 00:19

6800 to 6800Ultra mod at PCUnleash;
http://www.pcunleash.com/bbs/zboard....emReview&no=39

Haven't tried it yet, because my eVGA is brand new. But I may...Sponge Bob Square Pants

jmke · 30th September 2004, 00:22

well; you better have some fine cooling on your card if you wish to push that 6800 to Ultra speeds...

30th September 2004, 05:13

For some reason, when I want to post there or become a member, it tells me I should "write properly"

So I figured, since I can't post there I'd post it here cuz it 'll get noticed here aswell and I can probably get my questions answered here just as well if not better so here goes:

Quote:

Hey,

I have a lot of questions about the Asus V9999GE to ultra mod :

"once the X Y bridge has been disconnected"
-> This means unsoldering the tiny SMD right?

"and a bridge has joined the E and F"
-> How do you connect them? some solder? silverpaint or window repair kit? the SMD from between X and Y? ...

"the card can be turned into a 6800Ultra. Of course, only after the bios has been flashed"
-> Bios flash AFTER the hardmod correct (just to make sure)? What bios? ASUS V9999 Ultra 2 DT? ASUS V9999 Ultra Deluxe? Other bios? Where do I obtain the bios I need? Will that ultra bios need modding?

"there is no guarantee that the 4 pipelines on the GT will be in mint condition"
-> IF 1 or more pipelines are broken, how do I fix it? Just flash back to the original bios? Or wil I also have to connect X & Y and disconnect E & F again so that the hardware is back to it's original state?

Again, sorry for all those questions but if it's in stock I'm buying this card and I'll try to mod it so I have to be sure how to do it.

Thx in advance,

Kristos

posted this on XS and driverheaven with no succes :grum:

Sometimes I get the impression people misstrust newbies/low post counts or even me

jmke · 30th September 2004, 17:10

Quote:

Originally posted by Liquid3D
Haven't tried it yet, because my eVGA is brand new. But I may...Sponge Bob Square Pants

don't try it, wait for next release of this little soft http://www.digit-life.com/news.html?108919

1st October 2004, 23:14

Thx to PCunleash and monk for answering these questions

"once the X Y bridge has been disconnected"
-> This means unsoldering the tiny SMD right?
ANSWER: yes

"and a bridge has joined the E and F"
-> How do you connect them? some solder? silverpaint or window repair kit? the SMD from between X and Y? ...
ANSWER: Problems may occur if you just connect them, best is to connect E and F through the resistor you took from between X and Y.

"the card can be turned into a 6800Ultra. Of course, only after the bios has been flashed"
-> Bios flash AFTER the hardmod correct (just to make sure)? What bios? ASUS V9999 Ultra 2 DT? ASUS V9999 Ultra Deluxe? Other bios? Where do I obtain the bios I need? Will that ultra bios need modding?
ANSWER: Yes, perform the biosflash AFTER you did the hardmod. Any utlra bios wil do. you'll have to look around the web to find one to your liking.

"there is no guarantee that the 4 pipelines on the GT will be in mint condition"
-> IF 1 or more pipelines are broken, how do I fix it? Just flash back to the original bios? Or wil I also have to connect X & Y and disconnect E & F again so that the hardware is back to it's original state?
ANSWER: You can't fix it,if 1 or more of the unlocked pipelines are damaged, you're stuck with it.

I think I'll wait for the new rivatuner before I take my chances

Gamer · 1st October 2004, 23:17

wise decision

2nd October 2004, 00:16

why thank you

Once in every while I make a decision that is worthy of that label

all be it on very rare occasions

4th February 2005, 09:40

hmm, makes me want to get a 6800le just for the heck of it, i think i can afford to waste one of those

30th September 2004, 00:19	#1
Liquid3D Posts: n/a	6800 to 6900Ultra mod 6800 to 6800Ultra mod at PCUnleash; http://www.pcunleash.com/bbs/zboard....emReview&no=39 Haven't tried it yet, because my eVGA is brand new. But I may...Sponge Bob Square Pants

30th September 2004, 00:22	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	well; you better have some fine cooling on your card if you wish to push that 6800 to Ultra speeds... __________________

1st October 2004, 23:17	#6
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,587	wise decision __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Leadtek WinFast A400 Ultra TDH: GeForce 6800 Ultra Review	Sidney	WebNews	0	10th October 2004 22:34
Nvidia 6800 Ultra as rare as hens' Doc Marten boots	jmke	WebNews	0	7th October 2004 11:38
nVidia Geforce 6800 to 6800Ultra mod	jmke	WebNews	1	30th September 2004 05:27
Aopen Aeolus Geforce 6800 Ultra overclock	jmke	WebNews	0	23rd August 2004 19:49
NVIDIA GeForce 6800 Ultra Voltage Mod	jmke	WebNews	0	21st June 2004 11:32
NVIDIA GeForce 6800 Ultra Debuts in Retail - InnoVISION Rolls-Out First GeForce 6800	jmke	WebNews	0	25th May 2004 14:58
Gainward Details Faster GeForce 6800 Ultra Graphics Cards	jmke	WebNews	0	18th May 2004 08:58
No 6800 Ultra extreme, Nvidia says	jmke	WebNews	0	12th May 2004 16:13
Sources Confirm Albatron First-to-Market with GeForce 6800 Ultra	jmke	WebNews	0	10th May 2004 00:52
Albatron Wants to Retail GeForce 6800 Ultra in Early May	jmke	WebNews	0	30th April 2004 10:57

1st October 2004, 23:14	#5
kristos Posts: n/a	Thx to PCunleash and monk for answering these questions "once the X Y bridge has been disconnected" -> This means unsoldering the tiny SMD right? ANSWER: yes "and a bridge has joined the E and F" -> How do you connect them? some solder? silverpaint or window repair kit? the SMD from between X and Y? ... ANSWER: Problems may occur if you just connect them, best is to connect E and F through the resistor you took from between X and Y. "the card can be turned into a 6800Ultra. Of course, only after the bios has been flashed" -> Bios flash AFTER the hardmod correct (just to make sure)? What bios? ASUS V9999 Ultra 2 DT? ASUS V9999 Ultra Deluxe? Other bios? Where do I obtain the bios I need? Will that ultra bios need modding? ANSWER: Yes, perform the biosflash AFTER you did the hardmod. Any utlra bios wil do. you'll have to look around the web to find one to your liking. "there is no guarantee that the 4 pipelines on the GT will be in mint condition" -> IF 1 or more pipelines are broken, how do I fix it? Just flash back to the original bios? Or wil I also have to connect X & Y and disconnect E & F again so that the hardware is back to it's original state? ANSWER: You can't fix it,if 1 or more of the unlocked pipelines are damaged, you're stuck with it. I think I'll wait for the new rivatuner before I take my chances

2nd October 2004, 00:16	#7
kristos Posts: n/a	why thank you Once in every while I make a decision that is worthy of that label all be it on very rare occasions

4th February 2005, 09:40	#8
ssl6 Posts: n/a	hmm, makes me want to get a 6800le just for the heck of it, i think i can afford to waste one of those