Fanless and silent

Completely fanless, virtually noiseless

Passive cooling through convective heat transfer

Perfect to be used in noise-sensitive environments

Fanless means less dust and thus virtually no maintenance required

 

24/7 Nonstop Operation

This device is approved for 24/7 permanent operation.

Requirements:

- Free air circulation around the PC must be guaranteed.

- Ventilation holes must be kept clear.

- Any installed disk must also be approved for permanent operation by its manufacturer

 

Chassis

Slim PC with black chassis made of steel

Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre

Weight: 0.8 kg net and 2.1 kg gross

Two holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis

 

Operation Position

1) Horizontal

2) Vertical with mounted feet.

These feet can be purchased as an optional accessory PS02.

3) Vertical (e.g. VESA-mounted behind an appropriate monitor)

In vertical position, the front USB ports should point upward.

Ventilation holes must not be blocked to ensure sufficient cooling.

 

Operation System

This system comes without operating system.

It is compatible with

- Windows 10, Windows 11 (64-bit)

- Linux (64-bit)

 

Processor

Model: Intel® Processor N100

Max. Turbo clock frequency: 3.4 GHz

Code name: "Alder Lake-N"

10 nm structure, FCBGA1338 package (soldered)

CPU cores / Threads: 4 / 4

L2 Cache: 6 MB

Thermal Design Power (TDP): 6 W

System-on-Chip processor (SoC) with integrated graphics processor, no chipset required

 

Integrated Graphics

The Graphics Processing Unit (GPU) is integrated in the processor

Intel® UHD Graphics, GPU frequency: max. 750 MHz

Supports DirectX 12.1, OpenGL 4.6, OpenCL 3.0, Intel Quick Sync Video

Execution Units (EU): 24

Triple Display Support via three video outputs:

- HDMI 2.0b: max. 4096 x 2160 @ 60 Hz

- DisplayPort 1.4a: max. 4096 x 2160 @ 60 Hz

- D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz

Supports two digital displays and one analog display simultaneously.

The D-Sub/VGA connector does not support the Hot Plug feature.

 

UEFI Firmware

32 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware

Based on the Unified Extensible Firmware Interface (UEFI)

Supports Power-fail-resume / AC power-on state / always-on

Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states

Supports boot up from external flash memory cards

With embedded Firmware TPM v2.0 (fTPM)

CMOS battery (type CR2032)

 

Memory Support

1x SO-DIMM slots with 262 pins

Supports DDR5-4800 (PC5-38400U) SDRAM at 1.1V

Supports one RAM module with max. 16 GB capacity

Supports two unbuffered DIMM modules (no ECC)

 

2.5" Bay for Hard disk drive/SSD

Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)

Serial ATA III Interface with up to 600 MB/s transfer speed

Max. height 9.5 mm

Pre-installed SATA cable (data / power)

Supports Unified Extensible Firmware Interface (UEFI)

 

M.2 expansion slot for SSD card

M.2-2280 M-key slot

Interfaces: PCI-Express Gen. 3.0 X2 and SATA v3.0 (max. 6 Gbit/s)

Supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)

Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)

 

M.2-2230E slot for WLAN cards

Interfaces: PCI-Express Gen. 3.0 X1 und USB 2.0

Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)

Supports WLAN expansion cards (optional Shuttle accessory: WLN-M1)

 

Integrated Audio

Realtek ALC888S Audio Codec

Two analog audio connectors (3.5 mm):

1) Line out (headphones)

2) Microphone input

Digital multi-channel audio output: via HDMI and DisplayPort

 

Dual 2.5G LAN

Two RJ45 connectors support LAN at 100/1000/2500 Mbit/s.

2x Intel i226-LM Ethernet Controller

Supports Wake-on-LAN

 

LEDs and Buttons

Power button

Power LED (blue)

HDD LED (yellow)

 

Front Panel Connectors

4x USB 3.2 Gen 1 Type A (blau, max. 5 Gbps)

Audio 3.5 mm line-out (headphones)

Microphone 3.5 mm input

 

Back Panel Connectors

HDMI 2.0b digital video and audio output

DisplayPort 1.4a digital video and audio output

D-Sub/ VGA analog video output (15-pin) - no hot-plug

4x USB 3.2 Gen 1 Type A (blue, max. 5 Gbps)

2x LAN port 2.5 Gbps (Intel i226-LM, RJ45)

2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5/12 V, the left port is switchable to RS422 / RS485)

DC input for the external power adapter (supports 12V and 19V)

4-pin connector (2.54 mm pitch) supports

- external power-on button

- Clear CMOS function

- +5V DC voltage for external components

2x perforation for optional Wireless LAN antennas

 

Other Onboard Connectors

Connectors COM1/COM2 for serial ports (occupied)

Jumper JP1 for power-on-after-power-fail (hardware solution)

USB 2.0 header CN1 (4-pin) required for WWN03 accessory

 

Power Supply

External 65 W AC/DC power adapter (fanless)

AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz, max. 1.6 A

DC Output: 19 V, max. 3.42 A, max. 65 W

Automatic AC voltage adjust

DC cable length: ca. 180 cm

AC cable length: ca. 180 cm (3-pin Micky MM C6 and Schuko earthed safety plug)

 

DC Input connector

DC Connector: 5.5 / 2.5 mm (outer/inner diameter)

The DC-input of the computer supports an external power source

with either 12 V ±5% (max. 5.33 A) or 19 V ±5% (max. 3.42 A).

 

Supplied Accessories

Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)

VESA mount for 75 / 100 mm standard (two metal brackets)

Four screws M3 x 5 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to affix VESA mount on the PC)

Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)

Two screws M2 (to mount some M.2 cards)

Driver DVD (Windows 64-bit)

External 65 W power adapter with power cord (with protective-earth contacts)

 

Optional Accessories:

- PS02: optional stand for vertical operation

- CXP01: adapter cable for external power button

- PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs

- DIR01: DIN-Rail mounting kit

- WLN-M1: WLAN module in M.2 format supports Wi-Fi 6 (IEEE 802.11ax) and Bluetooth 5.2 including two external antennas and cables

- WWN03: LTE kit with adapter card, 2 antennas and antenna cables. Supports one M.2 LTE module and one nano SIM card

 

Environmental Specifications:

Operating temperature range: 0 ~ 40 °C

Relative humidity range: 10 ~ 90 % (non-condensing)