Fanless and Silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free
Low Power Consumption
Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must stay clear.
- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
Chassis
Slim-PC with black steel chassis
Without cooling fan, passive cooling only
The bays for memory, 2.5" drive and M.2 card
can easily be accessed by removing two cover plates.
Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 liters
Weight: 1.5 kg net and 2.2 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis
Operating Position
1) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).
2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 °C then.
Operating System
This barebone system comes without operating system.
It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).
Processor
Model: Intel Core i5-10210U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
FCBGA1528 package - directly soldered onto the mainboard
Code name: Comet Lake U (10th Generation Intel Core)
Cores / Threads: 4 / 8
Base frequency: 1.6 GHz
Max. Turbo frequency: 4.2 GHz
Intel Smart Cache: 6 MB
TDP wattage: 15 W maximum
Manufacturing process: 14nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated Graphics
Intel UHD Graphics
GPU clock frequency: 300~1100 MHz
Execution Units (EUs): 24
Supports DirectX 12, OpenGL 4.5
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports up to three independent screens:
1) DisplayPort 1.2 supports Ultra HD @ 60 Hz
2) HDMI 2.0a supports Ultra HD @ 60 Hz
3) D-Sub/VGA supports analog displays
Mainboard / BIOS
Shuttle Mainboard FS20
All capacitors are high quality solid capacitors
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from M.2 SSD cards und USB devices
AMI BIOS in 16 MByte EEPROM with SPI interface
Supports hardware monitoring and Watchdog function
Supports Unified Extensible Firmware Interface (UEFI)
Supports Firmware-TPM (fTPM) Version 2.0
Power Adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC cable length: ca. 170 cm
AC cable length: ca. 170 cm (3-pin Micky MM C6 and Schuko earthed safety plug)
DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% or 19V±5%.
Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2666 (PC4-21300) SDRAM at 1.2 V
Supports DDR4-3200 at 2666 MHz
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
2.5" Drive Bay with SATA connector
Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35 cm / 2.5" format
Device height: max. 12.5 mm
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI)
Note: no Serial ATA cable is required.