Fanless and silent

Completely fanless, virtually noiseless

Passive cooling through convective heat transfer

Perfect to be used in noise-sensitive environments

Fanless means less dust and thus virtually no maintenance required

 

Low Power Consumption

Power consumption in idle mode: 4.6 W

Power consumption under full load: 11.3 W / 17.6 W (CPU / CPU+graphics)

(measured with 2x 4 GB DDR4-2400 SO-DIMMs and 120 GB 2.5" SSD under Windows 10 64-bit)

 

Chassis

Slim PC with black chassis made of steel

Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre

Weight: 1.3 kg net and 2.1 kg gross

Two holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis

 

Operation Position

1) Horizontal

2) Vertical with mounted feet.

These feet can be purchased as optional accessory PS02.

3) Vertical (e.g. VESA-mounted behind an appropriate monitor)

In vertical position, the front USB ports should points upward.

Ventilation holes must not be blocked to ensure sufficient cooling.

 

Operating System

This system comes without operating system.

It is compatible with

- Windows 10 (64-bit)

- Linux (64-bit)

Note: Windows 7, 8 and 8.1 are not supported

 

Processor

Intel® Celeron® Processor J4005, Dual Core

CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.7 GHz

Code name: Gemini Lake, Goldmont Plus microarchitecture

14 nm structure, FCBGA1090 package (soldered)

CPU cores / Threads: 2 / 2

L2 Cache: 4 MB

Thermal Design Power (TDP): 10 W

Supports x86-64, AES-NI, VT-x (EPT), VT-d

System-on-Chip processor (SoC) with integrated graphics processor, no chipset required

 

Integrated Graphics

The Graphics Processing Unit (GPU) is integrated in the processor

Intel® UHD Graphics 600 (9th Gen), graphics frequency: 250~700 MHz

Supports DirectX 12, OpenGL 4.3, OpenCL 1.2, OpenGL ES 3.0, Intel Quick Sync Video, Intel Clear Video (HD)

Execution Units (EU): 12

Triple Display Support via three video outputs:

- HDMI 1.4b: max. 4096 x 2160 @ 30 Hz or 1920 x 1200 @ 60 Hz

- DisplayPort 1.2: max. 4096 x 2160 @ 60 Hz

- D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz

Supports two digital displays and one analog display simultaneously.

The D-Sub/VGA connector does not support the Hot Plug feature.

 

UEFI Firmware

16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware

Based on the Unified Extensible Firmware Interface (UEFI)

Supports Power fail resume / AC power on state / always on / always off

Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states

Supports boot up from external flash memory cards

With embedded Firmware TPM v2.0 (fTPM)

 

Memory

2x SO-DIMM slots with 260 pins

Supports DDR4-2400 (PC4-19200U) SDRAM at 1.2V

Supports Dual Channel mode

Supports max. 8 GB per DIMM

Maximum total size: 8 GB (either 1x 8 GB or 2x 4 GB)

Supports two unbuffered DIMM modules (no ECC)

 

2.5" Bay for Hard disk drive/SSD

Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)

Serial ATA III Interface with up to 600 MB/s transfer speed

Max. height 12.5 mm

Pre-installed SATA cable (data / power)

Supports Unified Extensible Firmware Interface (UEFI)

 

M.2 expansion slot for SSD card

M.2 2280 BM slot

Interfaces: PCI-Express Gen. 2.0 X4 (max. 16 Gbit/s) and SATA v3.0 (max. 6 Gbit/s)

Supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)

Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)

 

Integrated Audio

Realtek ALC269 Audio Codec

Two analog audio connectors (3.5 mm):

1) Line out (headphones)

2) Microphone input

Onboard connector for 2x 2 Watt speakers

Digital multi-channel audio output: via HDMI and DisplayPort

 

Card Reader

Integrated card reader supports standard SD, SDHC and SDXC memory flash cards

Supports boot from SD card

Controller: Realtek RTS5170 Media Processor