ASUSTOR AS6404T 4-bay NAS Review

Storage/NAS by stefan @ 2017-08-03

With the AS6404T 4-bay NAS from ASUSTOR we are seeing an update to the Intel Celeron Apollo Lake J3455 Quad-Core 1.5GHz processor, which is paired with no less than 8GB of DDR3L RAM in order to handle plenty of multimedia content types, but for also being able to use even more application modules at the same time. We do also see an USB 3.0 Type C port in the back for connecting modern storage devices, support up to 10TB drives (for a total of 40TB in a single NAS) and dual LAN that can be used for both Link Aggregation and Failover. The LCD panel is easy to operate via the hardware buttons, we get an IR receiver so the NAS can be operated via a Media Center remote, but also audio output via S/PDIF or HDMI 2.0 output for enjoying 4K @ 60Hz.

  • prev
  • next

Test Setup and Test Results

Test Setup

 

CPU : Intel I5 4690K Retail

CPU Cooler: Noctua NH-D14

Motherboard : BIOSTAR GAMING Z97X

RAM : GeIL EVO CORSA 16GB 2400MHz C11

(2GB Exceleram DDR1333 for NASPT compatibility)

Video : HIS 280X

Power Supply : Cooler Master 850W

SSD : OCZ Vertex 4 256GB

Case: Cooler Master ATCS840

 

To test the NAS performances, the AS6404T NAS was populated with one OCZ Vertex 4 SSD along with one KingFast SLC E-Drive in RAID 0, formatted with a single volume and the NAS was connected directly to the computer, to avoid any limitations by implying additional hardware like a router. The first simple test was performed by loading the test file onto a RAM drive and then it was copied to the NAS, on its shared folder. The speed was recorded with Total Commander:

 

 

The second test was to copy the same file back to the computer; for eliminating any HDD speed limitations, the file was copied back to the RAM drive:

 

 

For performing a more advanced test, the Intel NAS Performance Toolkit was used, for performing 5 different test runs. Here are the results:

 

 

As extras, we have also included ATTO Disk Benchmark and Anvil:

 

ATTO Disk Benchmark

 

 

Anvil

  • prev
  • next

No comments available.

 

reply