Storage/NAS by stefan @ 2014-02-13
HS-210 is the new fanless 2-bay NAS from QNAP which supports both 2.5’’ and 3.5’’ drives; the top cover acts as a large heatsink and is powered by a 1.6GHz Marvell processor along with 512MB of RAM. Thanks to the QTS 4.1 operating system, the NAS is fully featured but unfortunately it does not have a HDMI port for connecting directly to our HDTV.
From the Network menu we can modify the current settings, also including Wi-Fi (with a compatible adapter), IPv6, Proxy, DDNS and so on:
The Hardware section allows us to modify the HDD standby times, light signal alert, write cache, but also the buzzer behavior:
Next we could access the EuP Mode Configuration menu, WoL configuration, Power Recovery and Power schedule menus:
In order to keep the firmware updated, we can either use the Live Update option for doing this automatically or manually via the Firmware Update tab:
The NAS can save the system settings to a file via the Backup/Restore settings tab, but we can also bring it to the factory defaults:
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook