Storage/SSD by stefan @ 2013-01-07
The new F3 Series of SSDs from KingFast incorporate the well-known SandForce SF-2281VB1 controller and are well tuned for achieving high read/write performances. For added value, the SSDs are also shipped with a 2.5’’ to 3.5’’ adapter, fixing screws and a short SATA cable to get the installation done in a couple of minutes.
Model NO. KF2509MCF
Brand: Kingfast
Series: F3
Device Type: Internal Solid State Drive (SSD)
Form Factor: 2.5”
Capacity: 60/120/240/480GB
Memory Type: MLC
Interface: SATAIII
Size: 100*69.85*9.5mm
Performance:
Sequential Read/Write (Max): 550/530MB/s
Random IOPS Read/Write (Max): 80000/40000
Power Consumption:
Input Voltage: 5V±5%
Power Consumption (Idle) : 0.1W
Power Consumption (Active): 3.6W
Reliability:
M.T.BF: >2,000,000 hours
ECC: Up to 55bits correctable per 512-byte sector
S.M.A.R.T: support
Trim Support
Environment:
Operating Temp. : 0??70?
Storage Temp.: –55?95?
Anti Shock Operation: Shock: 1500G (@0.5ms half sine wave)
Warranty: 3 years
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook