The E30200A DDR3 from Exceleram are some really affordable 8GB memory modules that we can use in case we are running lots of virtual machines, Ramdrives or other memory-consuming applications. These are not too overclockable, so the maximum stability we could obtain only at 11-11-11-30, 1600Mhz, by running with two out of four sticks.
(for a single module)
DDR3 Single Channel
Timings: 9-9-9-24
Memory Speed: 1333MHz
Operating Voltage: 1.50V
Standard: DDR3
1x8GB
Heatsink: w/o
Chip: 512*8 x 16
EAN Code: 4712010950782
100% tested in Taiwan. Test-Mainboard: Asus
As the previous reviewed memory kit, the Exceleram E30200A memory modules have been shipped inside a simple plastic packaging, with a transparent top side, through which we can see how the modules look like:
The EP30200A modules do not come covered with any type of heatsink; during the stability stress tests, the chips barely got warm:
One of the sides comes with a sticker which shows the product code name, capacity, rated voltage, frequency, timings and serial number:
The modules come with 16 eTT chips, and they are described by Exceleram as being fully tested chips, but overproduced goods. These are sold unlabeled, mounted to modules by other manufacturers, and sold by them. Different to ‘Major Brand’, memory tests in finished module state are only rudimentary, or sometimes even omitted by these makers:
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook