The SATA Configuration menu lets us choose between the controller modes:

In the USB Configuration menu, we can enable or disable the interfaces:

The Super IO Configuration menu allows us to configure the Serial and Parallel Port interfaces:

In the Chipset tab, we've got two menus, one for the North Bridge and one for South Bridge:

The North Bridge menu allows us to set how much memory should be allocated for the integrated graphics, which GPU should be initialized first and here we can enable/disable the Crossfire option with the IGD:

The Chipset Configuration menu lets us enable or disable the audio interface from the Realtek controller or from the Azalia internal HDMI codec:

The M.I.B. III tab holds all the overclocking options; here we can modify the CPU Ratio (this feature is no use for the moment since the ratio is locked for the current APUs, but new models should appear with it unlocked), specify the memory clock, latencies, we can enable the Bus clock or modify the voltages for the CPU, VDIMM or NB:

In the Boot tab, we can specify the boot priorities:

The Security tab contains only one option, from which we can modify the administrator password for the UEFI:

Finally, in the Save&Exit tab, we can choose to save or discard the modifications, exit from the interface or load the system defaults: